5 years agonew steps to change a node's fcdistro in a bonding environment
Thierry Parmentelat [Mon, 27 Apr 2015 12:42:03 +0000]
new steps to change a node's fcdistro in a bonding environment

5 years agonodestate-upgrade to set node in boot_state 'upgrade'
Thierry Parmentelat [Fri, 24 Apr 2015 15:02:58 +0000]
nodestate-upgrade to set node in boot_state 'upgrade'

5 years agocosmetic IP pool sensing
Thierry Parmentelat [Thu, 16 Apr 2015 11:46:36 +0000]
cosmetic IP pool sensing

5 years agobonding nodes should not use plain-bootstrapfs as we don't install it
Thierry Parmentelat [Thu, 16 Apr 2015 11:46:12 +0000]
bonding nodes should not use plain-bootstrapfs as we don't install it

5 years agoconvenience step delete-node = delete-nodes
Thierry Parmentelat [Thu, 16 Apr 2015 11:45:46 +0000]
convenience step delete-node = delete-nodes

5 years agoarg-bonding-<> only contains hostname
Thierry Parmentelat [Thu, 16 Apr 2015 11:45:30 +0000]
arg-bonding-<> only contains hostname

5 years agorestore plain-bootstrapfs for better perfs
Thierry Parmentelat [Mon, 13 Apr 2015 14:10:33 +0000]
restore plain-bootstrapfs for better perfs

5 years agonotes on installing syslinux on the myplc side
Thierry Parmentelat [Mon, 13 Apr 2015 14:02:39 +0000]
notes on installing syslinux on the myplc side

5 years agorenamed installed_bonds into bonding_builds and added bonding_nodes
Thierry Parmentelat [Mon, 13 Apr 2015 13:39:32 +0000]
renamed installed_bonds into bonding_builds and added bonding_nodes

5 years agorenamed qemu_nodeflavour into more proper qemu_nodefamily
Thierry Parmentelat [Mon, 13 Apr 2015 13:02:01 +0000]
renamed qemu_nodeflavour into more proper qemu_nodefamily

5 years agobonds: use rung <=> run -G that hurts my pinky
Thierry Parmentelat [Mon, 13 Apr 2015 13:00:04 +0000]
bonds: use rung <=> run -G  that hurts my pinky
fix IP pool allocation
store nodefamily in qemu workdir (step qemu_nodeflavour)

5 years agorun -g with bonding build can provision node (and locate free IP) and run most usual...
Thierry Parmentelat [Mon, 13 Apr 2015 09:43:06 +0000]
run -g with bonding build can provision node (and locate free IP) and run most usual targets
do not use plain bootstrapfs anymore
dropped hack for adding epel repo on centos5

5 years agoconvenience macros restart-node and wait-node
Thierry Parmentelat [Mon, 13 Apr 2015 09:40:35 +0000]
convenience macros restart-node and wait-node

5 years agoget bootcd to run in dry-mode
Thierry Parmentelat [Mon, 13 Apr 2015 09:40:05 +0000]
get bootcd to run in dry-mode

5 years agomiscell cosmetic + pass the substrate object to TestBonding so it can compute an...
Thierry Parmentelat [Mon, 13 Apr 2015 07:13:44 +0000]
miscell cosmetic + pass the substrate object to TestBonding so it can compute an available IP for a bonding node

5 years agocosmetic
Thierry Parmentelat [Sun, 12 Apr 2015 15:47:58 +0000]

5 years agobootmedium options and node tags in the config
Thierry Parmentelat [Sun, 12 Apr 2015 15:47:34 +0000]
bootmedium options and node tags in the config

5 years agobonding: exclude drupal when updating
Thierry Parmentelat [Sun, 12 Apr 2015 10:43:31 +0000]
bonding: exclude drupal when updating

5 years agomore IPs for vplc
Thierry Parmentelat [Sun, 12 Apr 2015 09:28:13 +0000]
more IPs for vplc

5 years agosomehow the just-created bridge interface was found down on our qemu host...
Thierry Parmentelat [Sat, 11 Apr 2015 18:12:49 +0000]
somehow the just-created bridge interface was found down on our qemu host...
plus, ip route add default won't work any more and I have to specify

5 years agokeep stdin open in the ssh leg between host and guest
Thierry Parmentelat [Sat, 11 Apr 2015 16:25:35 +0000]
keep stdin open in the ssh leg between host and guest

5 years agono more lxc-enter-namespace - use ssh
Thierry Parmentelat [Sat, 11 Apr 2015 11:14:10 +0000]
no more lxc-enter-namespace - use ssh

5 years agoremove spurrious msgs from stderr
Thierry Parmentelat [Tue, 7 Apr 2015 09:30:49 +0000]
remove spurrious msgs from stderr
all classes in Substrate have a __repr__ for dbg

5 years agoboxtops can stand the heat
Thierry Parmentelat [Sat, 4 Apr 2015 14:03:45 +0000]
boxtops can stand the heat

5 years agonicer
Thierry Parmentelat [Fri, 3 Apr 2015 15:32:46 +0000]

5 years agoneeded for creating leases in python3
Thierry Parmentelat [Fri, 3 Apr 2015 12:24:02 +0000]
needed for creating leases in python3

5 years agoSetting tag tests-6.0-1 tests-6.0-1
Thierry Parmentelat [Fri, 3 Apr 2015 08:57:21 +0000]
Setting tag tests-6.0-1
runs python3
mostly current infra is based on f21
known pending issue as we now have build VMs and vplcs in the same box
and Substrate needs a few tweaks to handle that more accurately

5 years agobump to version 6 as we now use python3
Thierry Parmentelat [Fri, 3 Apr 2015 08:55:54 +0000]
bump to version 6 as we now use python3

5 years agomore smartly sense for vplc instances now that we run build VMs and vplc's in the...
Thierry Parmentelat [Thu, 2 Apr 2015 16:18:57 +0000]
more smartly sense for vplc instances now that we run build VMs and vplc's in the same physical host

5 years agomove vplc instances to buzzcocks - that is also the build box
Thierry Parmentelat [Thu, 2 Apr 2015 16:07:55 +0000]
move vplc instances to buzzcocks - that is also the build box

5 years agorun lxc-enter-namespace with --noseclabel
Thierry Parmentelat [Thu, 2 Apr 2015 16:07:29 +0000]
run lxc-enter-namespace with --noseclabel

5 years agoreplace os.system with subprocess.call - add a timeout option in the mix
Thierry Parmentelat [Thu, 19 Mar 2015 20:24:23 +0000]
replace os.system with subprocess.call - add a timeout option in the mix
today for the first time ever a slice was not answering ssh but the ssh client would hang forever..

5 years agonicer
Thierry Parmentelat [Thu, 19 Mar 2015 20:21:24 +0000]

5 years agokeep track of what has moved to py3
Thierry Parmentelat [Thu, 19 Mar 2015 20:16:53 +0000]
keep track of what has moved to py3

5 years agooops
Thierry Parmentelat [Thu, 19 Mar 2015 10:24:29 +0000]

5 years agoSyntaxError: from __future__ imports must occur at the beginning of the file
Thierry Parmentelat [Wed, 18 Mar 2015 16:27:02 +0000]
SyntaxError: from __future__ imports must occur at the beginning of the file

5 years agorevert tcptest to python2 as this runs in the slice context
Thierry Parmentelat [Wed, 18 Mar 2015 15:40:31 +0000]
revert tcptest to python2 as this runs in the slice context
use print() as per print_function though

5 years agoneed to invoke python3
Thierry Parmentelat [Wed, 18 Mar 2015 13:16:18 +0000]
need to invoke python3

5 years agopython3 - first draft looks kind of OK
Thierry Parmentelat [Wed, 18 Mar 2015 10:47:11 +0000]
python3 - first draft looks kind of OK

5 years agoSetting tag tests-5.3-10 tests-5.3-10
Thierry Parmentelat [Wed, 18 Mar 2015 09:36:51 +0000]
Setting tag tests-5.3-10
no functional change, but hopefully last version for python2

5 years agooops
Thierry Parmentelat [Tue, 17 Mar 2015 20:25:35 +0000]

5 years agoone layer of polish
Thierry Parmentelat [Tue, 17 Mar 2015 16:58:59 +0000]
one layer of polish

5 years agoa first rough implementation for testing 'bonding' myplc's
Thierry Parmentelat [Tue, 17 Mar 2015 09:49:39 +0000]
a first rough implementation for testing 'bonding' myplc's
typicallly, you would have 2 complete builds b1 and b2

then on testmaster in b1 you can do
$ run --bonding b2
or simply
$ run -g b2

in order to expose the nodeflavour and slicefamily provided by b2 to build b1

for now it only does the partial-rpms & yum install bootcd nodeimage noderepo & packages reindexing

need some more work to bring a actual nodes and slices online

5 years agoArgumentParser instead of OptionParser
Thierry Parmentelat [Mon, 16 Mar 2015 21:57:17 +0000]
ArgumentParser instead of OptionParser

5 years agomore pretty-printing
Thierry Parmentelat [Mon, 16 Mar 2015 21:06:55 +0000]
more pretty-printing

5 years agono change - pretty printed mostly
Thierry Parmentelat [Mon, 16 Mar 2015 16:08:53 +0000]
no change - pretty printed mostly

5 years agorelease reed from its build duties
Thierry Parmentelat [Thu, 12 Mar 2015 10:58:18 +0000]
release reed from its build duties

5 years agocheck_initscripts no longer a warning
Thierry Parmentelat [Tue, 10 Mar 2015 10:23:44 +0000]
check_initscripts no longer a warning

5 years agomake cross-check-tcp more robust : we need to wait for network presence on both ends...
Thierry Parmentelat [Mon, 9 Mar 2015 14:08:56 +0000]
make cross-check-tcp more robust : we need to wait for network presence on both ends of the link

5 years agohave iterate-ping-node display its logdir
Thierry Parmentelat [Sun, 8 Mar 2015 23:15:58 +0000]
have iterate-ping-node display its logdir

5 years agoiterate-ping-node with the -o option
Thierry Parmentelat [Fri, 6 Mar 2015 23:09:05 +0000]
iterate-ping-node with the -o option

5 years agoa utility script for hammering on the ping-node step
Thierry Parmentelat [Fri, 6 Mar 2015 10:12:37 +0000]
a utility script for hammering on the ping-node step

5 years agocosmetic - when displaying Completer short timeouts (in the order of seconds and...
Thierry Parmentelat [Thu, 5 Mar 2015 12:43:59 +0000]
cosmetic - when displaying Completer short timeouts (in the order of seconds and not minutes)

5 years agomake tcptest ready more stringent : check that eth0 indeed has an ipv4 address
Thierry Parmentelat [Thu, 5 Mar 2015 12:43:18 +0000]
make tcptest ready more stringent : check that eth0 indeed has an ipv4 address

5 years agorework check-tcp so that we first wait for the network to be ready in the sliver
Thierry Parmentelat [Tue, 3 Mar 2015 23:36:21 +0000]
rework check-tcp so that we first wait for the network to be ready in the sliver

5 years agothe kernel flag systemd.log_level=debug is not set by default anymore, we add the...
Thierry Parmentelat [Tue, 3 Mar 2015 15:01:04 +0000]
the kernel flag systemd.log_level=debug is not set by default anymore, we add the option to GetBootMedium that does this

5 years agoimprove the output of tcp{server,client}
Thierry Parmentelat [Tue, 3 Mar 2015 13:51:04 +0000]
improve the output of tcp{server,client}
make sure this can be used next time this step fails

5 years agouse consitent convention for displaying step names
Thierry Parmentelat [Tue, 3 Mar 2015 13:50:07 +0000]
use consitent convention for displaying step names

5 years agouse standard python presentation convention
Thierry Parmentelat [Tue, 3 Mar 2015 13:21:36 +0000]
use standard python presentation convention

5 years agoshow network status inside tcptest.py in server mode
Thierry Parmentelat [Tue, 3 Mar 2015 10:37:40 +0000]
show network status inside tcptest.py in server mode

5 years agocosmetic changes only
Thierry Parmentelat [Tue, 3 Mar 2015 10:37:34 +0000]
cosmetic changes only
+ a comment on the occasional issue with cross-check-tcp

5 years agono need to wait that long for ping_node, it works very fast, or does not
Thierry Parmentelat [Mon, 2 Mar 2015 20:18:59 +0000]
no need to wait that long for ping_node, it works very fast, or does not

5 years agocomment for keeping track of the memory size
Thierry Parmentelat [Mon, 2 Mar 2015 14:00:07 +0000]
comment for keeping track of the memory size

5 years agoincrease memory of test qemu VMs to 2Gb
Thierry Parmentelat [Mon, 2 Mar 2015 13:58:37 +0000]
increase memory of test qemu VMs to 2Gb

5 years agoa new config that tweaks the config and removes initscript-related annotations
Thierry Parmentelat [Mon, 2 Mar 2015 11:49:10 +0000]
a new config that tweaks the config and removes initscript-related annotations

5 years agopass dry_run to the ssh-node-{debug,boot} steps
Thierry Parmentelat [Sun, 1 Mar 2015 15:10:43 +0000]
pass dry_run to the ssh-node-{debug,boot} steps

5 years agonicer displays of various durations
Thierry Parmentelat [Sun, 1 Mar 2015 07:22:55 +0000]
nicer displays of various durations

5 years agowelcome to buzzcocks
Thierry Parmentelat [Sat, 28 Feb 2015 13:31:51 +0000]
welcome to buzzcocks

5 years agosuccessful Completer prints duration
Thierry Parmentelat [Sat, 28 Feb 2015 11:19:08 +0000]
successful Completer prints duration

5 years agonot sure if it's the 21 nodes that have a larger payload, or if it's because we have...
Thierry Parmentelat [Sat, 28 Feb 2015 09:59:28 +0000]
not sure if it's the 21 nodes that have a larger payload, or if it's because we have all kvm nodes in a single box now,
but we need to alllow for more time before the node pings

5 years agoneed to see how far the f21 build can go
Thierry Parmentelat [Fri, 27 Feb 2015 22:17:33 +0000]
need to see how far the f21 build can go

5 years agobridge initialization on a f21 testbox; only uses ip, i.e. no ifconfig or route anymore
Thierry Parmentelat [Fri, 27 Feb 2015 08:42:09 +0000]
bridge initialization on a f21 testbox; only uses ip, i.e. no ifconfig or route anymore

5 years agofail on purpose while all slices are running
Thierry Parmentelat [Thu, 26 Feb 2015 15:09:44 +0000]
fail on purpose while all slices are running

5 years agomove to another box
Thierry Parmentelat [Wed, 25 Feb 2015 15:34:50 +0000]
move to another box

5 years agoMerge branch 'sfa-geni-v3' of ssh://git.onelab.eu/git/tests into sfa-geni-v3
Thierry Parmentelat [Tue, 24 Feb 2015 16:50:24 +0000]
Merge branch 'sfa-geni-v3' of ssh://git.onelab.eu/git/tests into sfa-geni-v3

5 years agouse a single recent test box instead of n small old boxes
Thierry Parmentelat [Tue, 24 Feb 2015 16:50:00 +0000]
use a single recent test box instead of n small old boxes

5 years agoSetting tag tests-5.3-9 tests-5.3-9
Thierry Parmentelat [Wed, 18 Feb 2015 11:48:48 +0000]
Setting tag tests-5.3-9
add tests for sfa and empty rspecs

5 years agoturn off the 'fail' step that was causing the builds to fail for forensics purposes
Thierry Parmentelat [Wed, 18 Feb 2015 09:07:25 +0000]
turn off the 'fail' step that was causing the builds to fail for forensics purposes

5 years agoforce failure after slice-fs-deleted
Thierry Parmentelat [Sun, 8 Feb 2015 11:13:54 +0000]
force failure after slice-fs-deleted

5 years agodo not ignore slice-fs-deleted
Thierry Parmentelat [Fri, 6 Feb 2015 21:43:32 +0000]
do not ignore slice-fs-deleted

5 years agoestran out
Thierry Parmentelat [Tue, 14 Oct 2014 07:20:22 +0000]
estran out

5 years agoestran : max vnodes 3->2, too small disk
Thierry Parmentelat [Mon, 22 Sep 2014 14:30:03 +0000]
estran : max vnodes 3->2, too small disk

5 years agodecidedly... sfa_rspec_empty needs the sfi/pg dir to have been created beforehand
Thierry Parmentelat [Fri, 22 Aug 2014 10:46:25 +0000]
decidedly... sfa_rspec_empty needs the sfi/pg dir to have been created beforehand

5 years agothe sfa_{allocate,provision,check_slice_plc}_empty sequence needs to be done later
Thierry Parmentelat [Thu, 21 Aug 2014 16:28:21 +0000]
the sfa_{allocate,provision,check_slice_plc}_empty sequence needs to be done later

5 years agoSetting tag tests-5.3-8 tests-5.3-8
Thierry Parmentelat [Wed, 20 Aug 2014 13:56:11 +0000]
Setting tag tests-5.3-8
add a few test steps to check that a slice can be emptied using an empty rspec

5 years agotest that a slice resources can be released using an empty rspec to allocate and...
Thierry Parmentelat [Wed, 20 Aug 2014 11:03:19 +0000]
test that a slice resources can be released using an empty rspec to allocate and provision, and that this propagates to the plc properly

5 years agoSetting tag tests-5.3-7 tests-5.3-7
Thierry Parmentelat [Wed, 16 Jul 2014 21:19:01 +0000]
Setting tag tests-5.3-7
run linux32 in 32bits VMs

5 years agovelvet needs attention
Thierry Parmentelat [Mon, 14 Jul 2014 08:48:04 +0000]
velvet needs attention

5 years agofix for calling stuff on the guest side with the right personality
Thierry Parmentelat [Sun, 13 Jul 2014 11:34:54 +0000]
fix for calling stuff on the guest side with the right personality

5 years agoSetting tag tests-5.3-6 tests-5.3-6
Thierry Parmentelat [Wed, 4 Jun 2014 08:20:28 +0000]
Setting tag tests-5.3-6
split sfa-create-slice into 3 distinct steps sfa-rspec sfa-allocate sfa-provision

5 years agoMerge branch 'sfa-geni-v3' of ssh://git.onelab.eu/git/tests into sfa-geni-v3
Thierry Parmentelat [Tue, 3 Jun 2014 14:52:12 +0000]
Merge branch 'sfa-geni-v3' of ssh://git.onelab.eu/git/tests into sfa-geni-v3

5 years agosplit sfa-create-slice into sfa-rspec\001 sfa-allocate and sfa-provision
Thierry Parmentelat [Tue, 3 Jun 2014 14:50:07 +0000]
split sfa-create-slice into sfa-rspec\001 sfa-allocate and sfa-provision

5 years agoSetting tag tests-5.3-5 tests-5.3-5
Thierry Parmentelat [Mon, 2 Jun 2014 07:49:36 +0000]
Setting tag tests-5.3-5
dropped the pl sfa rspec_style in default config
dropped slice manager, sfi talks to AM directly
bump ram to 1.5Gb
Substrate probes for total memory
rename sfa-add-* steps into sfa-register-*
new steps sfa-remove-user sfa-insert-user-in-slice sfi-show-slice sfi-show-slice-researchers
sfi-show-site slice-fs-deleted slice-fs-present super-speed-up-slices
new macros sfa-populate sfa-delete sfa-user-slice slice-up slice-down slice-up-down
sfa-get-expires pending

6 years agonew step sfa_get_expires is able to retrieve the actual expires timeout in a slice
Thierry Parmentelat [Wed, 28 May 2014 15:39:41 +0000]
new step sfa_get_expires is able to retrieve the actual expires timeout in a slice
needs to be welded in sfa_renew_slice so we really check renew does what is expected

6 years agoonly test the pg rspec_style
Thierry Parmentelat [Wed, 28 May 2014 09:07:42 +0000]
only test the pg rspec_style

6 years agooops, should be part of the previous commit, sfi needs to be redirected to the port...
Thierry Parmentelat [Wed, 28 May 2014 09:07:22 +0000]
oops, should be part of the previous commit, sfi needs to be redirected to the port from config

6 years agoconsidering SM as deprecated :
Thierry Parmentelat [Wed, 28 May 2014 08:44:26 +0000]
considering SM as deprecated :
tests will use sfi connecting directly to the AM, and turn off the SM

6 years agodo not ignore the ssh-slice-again step; this is still broken in f20
Thierry Parmentelat [Tue, 27 May 2014 08:41:46 +0000]
do not ignore the ssh-slice-again step; this is still broken in f20

6 years agosuper-speed-up-slices
Thierry Parmentelat [Fri, 23 May 2014 13:36:12 +0000]

6 years agohide enfoui
Thierry Parmentelat [Thu, 22 May 2014 16:10:39 +0000]
hide enfoui