fetch resources in url /googlemap/ - would come with plewww
[myplc.git] / default_config.xml
1 <?xml version="1.0" encoding="utf-8"?>
2
3 <!--
4 Default PLC configuration file
5
6 Mark Huang <mlhuang@cs.princeton.edu>
7 Copyright (C) 2006 The Trustees of Princeton University
8
9 -->
10
11 <!DOCTYPE configuration PUBLIC "-//PlanetLab Central//DTD PLC configuration//EN" "plc_config.dtd">
12
13 <configuration>
14   <variables>
15     <category id="plc">
16       <name>System</name>
17       <description>Basic system variables. Be sure that the values of
18       these variables are the same across all machines in your
19       installation.</description>
20
21       <variablelist>
22         <variable id="name" type="string">
23           <name>Name</name>
24           <value>PlanetLab Test</value>
25           <description>The name of this PLC installation. It is used in
26           the name of the default system site (e.g., PlanetLab Central)
27           and in the names of various administrative entities (e.g.,
28           PlanetLab Support).</description>
29         </variable>
30
31         <variable id="shortname" type="string">
32           <name>Shortame</name>
33           <value>Tlab</value>
34           <description>The short name of this PLC installation. It is
35           mostly used in the web interface when displaying local
36           objects.</description>
37         </variable>
38
39         <variable id="hrn_root" type="string">
40           <name>Root in Hierarchical Naming Space </name>
41           <value>planetlab.test</value>
42           <description> The root of this peer in the hierarchical federation naming space.</description>
43         </variable>
44
45         <variable id="slice_prefix" type="string">
46           <name>Slice Prefix</name>
47           <value>pl</value>
48           <description>The abbreviated name of this PLC
49           installation. It is used as the prefix for system slices
50           (e.g., pl_conf). Warning: Currently, this variable should
51           not be changed.</description>
52         </variable>
53
54         <variable id="root_user" type="email">
55           <name>Root Account</name>
56           <value>root@localhost.localdomain</value>
57           <description>The name of the initial administrative
58           account. We recommend that this account be used only to create
59           additional accounts associated with real
60           administrators, then disabled.</description>
61         </variable>
62
63         <variable id="root_password" type="password">
64           <name>Root Password</name>
65           <value>root</value>
66           <description>The password of the initial administrative
67           account. Also the password of the root account on the Boot
68           CD.</description>
69         </variable>
70
71         <!-- The following are not actually meant to be configurable
72              as variables. The web interface should allow the file to
73              be downloaded, or its contents replaced by a file upload,
74              but the actual <value> shouldn't need to be changed.  -->
75
76         <variable id="root_ssh_key_pub" type="file">
77           <name>Root SSH Public Key</name>
78           <value>/etc/planetlab/root_ssh_key.pub</value>
79           <description>The SSH public key used to access the root
80           account on your nodes.</description>
81         </variable>
82
83         <variable id="root_ssh_key" type="file">
84           <name>Root SSH Private Key</name>
85           <value>/etc/planetlab/root_ssh_key.rsa</value>
86           <description>The SSH private key used to access the root
87           account on your nodes.</description>
88         </variable>
89
90         <variable id="debug_ssh_key_pub" type="file">
91           <name>Debug SSH Public Key</name>
92           <value>/etc/planetlab/debug_ssh_key.pub</value>
93           <description>The SSH public key used to access the root
94           account on your nodes when they are in Debug mode.</description>
95         </variable>
96
97         <variable id="debug_ssh_key" type="file">
98           <name>Debug SSH Private Key</name>
99           <value>/etc/planetlab/debug_ssh_key.rsa</value>
100           <description>The SSH private key used to access the root
101           account on your nodes when they are in Debug mode.</description>
102         </variable>
103
104         <variable id="root_gpg_key_pub" type="file">
105           <name>Root GPG Public Keyring</name>
106           <value>/etc/planetlab/pubring.gpg</value>
107           <description>The GPG public keyring used to sign the Boot
108           Manager and all node packages.</description>
109         </variable>
110
111         <variable id="root_gpg_key" type="file">
112           <name>Root GPG Private Keyring</name>
113           <value>/etc/planetlab/secring.gpg</value>
114           <description>The SSH private key used to access the root
115           account on your nodes.</description>
116         </variable>
117
118       </variablelist>
119     </category>
120
121     <category id="plc_flavour">
122       <name>Flavours</name>
123       <description>Defaults for nodes and slices contents.</description>
124       
125       <variablelist>
126         <variable id="node_arch" type="string">
127           <name>arch for nodes</name>
128           <value>@ARCH@</value>
129           <description>The default 'arch' to use when installing nodes.
130           This is offered mostly for consistency with the rest of the
131           PLC_FLAVOUR category, but does not have much of a practical
132           interest. In any case, you need to have the corresponding
133           bootstrapfs images available for nodes.</description>
134         </variable>
135
136         <variable id="node_fcdistro" type="string">
137           <name>fcdistro for nodes</name>
138           <value>@FCDISTRO@</value>
139           <description>THIS CURRENTLY HAS NO EFFECT.
140           The default 'fcdistro' to use when installing
141           nodes.You need to have the corresponding bootstrapfs images
142           available for nodes. THIS CURRENTLY HAS NO EFFECT.</description>
143         </variable>
144
145         <variable id="node_pldistro" type="string">
146           <name>pldistro for nodes</name>
147           <value>@PLDISTRO@</value>
148           <description>The default 'pldistro' to use when installing
149           nodes. You need to have the corresponding bootstrapfs
150           images available for nodes.</description>
151         </variable>
152
153         <variable id="slice_arch" type="string">
154           <name>arch for slivers</name>
155           <value>@ARCH@</value>
156           <description>The default 'arch' to use for slivers. This is
157           useful if you have heterogeneous nodes (i686 and x86_64),
158           but want slivers to be homogeneous. You need to have the
159           corresponding vserver variant rpm available for
160           nodes.</description>
161         </variable>
162
163         <variable id="slice_fcdistro" type="string">
164           <name>fcdistro for slivers</name>
165           <value>@FCDISTRO@</value>
166           <description>The default 'fcdistro' to use for creating
167           slivers. You need to have the corresponding vserver variant
168           rpm available for nodes.</description>
169         </variable>
170
171         <variable id="slice_pldistro" type="string">
172           <name>pldistro for slivers</name>
173           <value>@PLDISTRO@</value>
174           <description>The default 'pldistro' to use for creating
175           slivers. You need to have the corresponding vserver variant
176           rpm available for nodes.</description>
177         </variable>
178
179       </variablelist>
180     </category>
181
182     <category id="plc_net">
183       <name>Network</name>
184       <description>Network environment.</description>
185
186       <variablelist>
187         <variable id="dns1" type="ip">
188           <name>Primary DNS Server</name>
189           <value>127.0.0.1</value>
190           <description>Primary DNS server address.</description>
191         </variable>
192
193         <variable id="dns2" type="ip">
194           <name>Secondary DNS Server</name>
195           <value></value>
196           <description>Secondary DNS server address.</description>
197         </variable>
198       </variablelist>
199     </category>
200
201     <category id="plc_dns">
202       <name>DNS</name>
203       <description>MyPLC can provide forward DNS resolution for itself
204       and for its nodes. To enable resolution for MyPLC itself, set
205       the Primary DNS Server address to 127.0.0.1 and provide external
206       IP addresses for the database, API, web, and boot servers
207       below. To enable resolution for nodes, use the external IP
208       address of this machine as the primary DNS server address for
209       each node.</description>
210
211       <variablelist>
212         <variable id="enabled" type="boolean">
213           <name>Enable DNS</name>
214           <value>true</value>
215           <description>Enable the internal DNS server. The server does
216           not provide reverse resolution and is not a production
217           quality or scalable DNS solution. Use the internal DNS
218           server only for small deployments or for
219           testing.</description>
220         </variable>
221       </variablelist>
222     </category>
223
224     <category id="plc_hosts">
225       <name>/etc/hosts</name>
226       <description>MyPLC can setup /etc/hosts with the hostnames and
227       IP addresses specified for *_NAME and *_IP, or look up the IP
228       addresses if they are not specified in this configuration.
229       </description>
230
231       <variablelist>
232         <variable id="enabled" type="boolean">
233           <name>Enable /etc/hosts configuration</name>
234           <value>true</value>
235           <description>Let PLC manage /etc/hosts</description>
236         </variable>
237       </variablelist>
238     </category>
239
240     <category id="plc_mail">
241       <name>Mail</name>
242       <description>Many maintenance scripts, as well as the API and
243       web site themselves, send e-mail notifications and
244       warnings.</description>
245
246       <variablelist>
247         <variable id="enabled" type="boolean">
248           <name>Enable Mail</name>
249           <value>false</value>
250           <description>Set to false to suppress all e-mail notifications
251           and warnings.</description>
252         </variable>
253
254         <variable id="support_address" type="email">
255           <name>Support Address</name>
256           <value>root+support@localhost.localdomain</value>
257           <description>This address is used for support
258           requests. Support requests may include traffic complaints,
259           security incident reporting, web site malfunctions, and
260           general requests for information. We recommend that the
261           address be aliased to a ticketing system such as Request
262           Tracker.</description>
263         </variable>
264
265         <variable id="boot_address" type="email">
266           <name>Boot Messages Address</name>
267           <value>root+install-msgs@localhost.localdomain</value>
268           <description>The API will notify this address when a problem
269           occurs during node installation or boot.</description>
270         </variable>
271
272         <variable id="mom_list_address" type="email">
273           <name>Mom List Address</name>
274           <value>root+mom@localhost.localdomain</value>
275           <description>This address is used by operations staff
276           to monitor Mom (formerly pl_mom) messages indicating
277           excessive BW or memory usage by a slice.  Mom messages sent
278           to slices will be cc'ed to this list so as not to clog
279           the Support Address list.</description>
280         </variable>
281
282         <variable id="slice_address" type="email">
283           <name>Slice Address</name>
284           <value>root+SLICE@localhost.localdomain</value>
285           <description>This address template is used for sending
286           e-mail notifications to slices. SLICE will be replaced with
287           the name of the slice.</description>
288         </variable>
289       </variablelist>
290     </category>
291
292     <category id="plc_db">
293       <name>Database Server</name>
294       <description>Database server definitions.</description>
295
296       <variablelist>
297         <variable id="enabled" type="boolean">
298           <name>Enabled</name>
299           <value>true</value>
300           <description>Enable the database server on this
301           machine.</description>
302         </variable>
303
304         <variable id="type" type="string">
305           <name>Type</name>
306           <value>postgresql</value>
307           <description>The type of database server. Currently, only
308           postgresql is supported.</description>
309         </variable>
310
311         <variable id="host" type="hostname">
312           <name>Hostname</name>
313           <value>localhost.localdomain</value>
314           <description>The fully qualified hostname of the database
315           server.</description>
316         </variable>
317
318         <variable id="ip" type="ip">
319           <name>IP Address</name>
320           <value/>
321           <description>The IP address of the database server, if not
322           resolvable.</description>
323         </variable>
324
325         <variable id="port" type="int">
326           <name>Port</name>
327           <value>5432</value>
328           <description>The TCP port number through which the database
329           server should be accessed.</description>
330         </variable>
331
332         <variable id="name" type="string">
333           <name>Database Name</name>
334           <value>planetlab5</value>
335           <description>The name of the database to access.</description>
336         </variable>
337
338         <variable id="user" type="string">
339           <name>Database Username</name>
340           <value>pgsqluser</value>
341           <description>The username to use when accessing the
342           database.</description>
343         </variable>
344
345         <variable id="password" type="password">
346           <name>Database Password</name>
347           <value></value>
348           <description>The password to use when accessing the
349           database. If left blank, one will be
350           generated.</description>
351         </variable>
352       </variablelist>
353     </category>
354
355     <category id="plc_api">
356       <name>API Server</name>
357       <description>API (XML-RPC) server definitions.</description>
358
359       <variablelist>
360         <variable id="enabled" type="boolean">
361           <name>Enabled</name>
362           <value>true</value>
363           <description>Enable the API server on this
364           machine.</description>
365         </variable>
366
367         <variable id="debug" type="boolean">
368           <name>Debug</name>
369           <value>false</value>
370           <description>Enable verbose API debugging. Do not enable on
371           a production system!</description>
372         </variable>
373
374         <variable id="host" type="hostname">
375           <name>Hostname</name>
376           <value>localhost.localdomain</value>
377           <description>The fully qualified hostname of the API
378           server.</description>
379         </variable>
380
381         <variable id="ip" type="ip">
382           <name>IP Address</name>
383           <value/>
384           <description>The IP address of the API server, if not
385           resolvable.</description>
386         </variable>
387
388         <variable id="ipod_subnet" type="ip">
389           <name>IP Subnet</name>
390           <value>127.0.0.1</value>
391           <description>The IP Subnet for all API servers. 
392           Used to identify IPoD packet senders.</description>
393         </variable>
394
395         <variable id="ipod_mask" type="ip">
396           <name>IP Mask</name>
397           <value>255.255.255.255</value>
398           <description>The IP Mask that should be applied to incoming 
399           packets to match the IP Subnet for IPoD packets.</description>
400         </variable>
401
402         <variable id="port" type="int">
403           <name>Port</name>
404           <value>443</value>
405           <description>The TCP port number through which the API
406           should be accessed.</description>
407         </variable>
408
409         <variable id="path" type="string">
410           <name>Path</name>
411           <value>/PLCAPI/</value>
412           <description>The base path of the API URL.</description>
413         </variable>
414
415         <variable id="maintenance_user" type="string">
416           <name>Maintenance User</name>
417           <value>maint@localhost.localdomain</value>
418           <description>The username of the maintenance account. This
419           account is used by local scripts that perform automated
420           tasks, and cannot be used for normal logins.</description>
421         </variable>
422
423         <variable id="maintenance_password" type="password">
424           <name>Maintenance Password</name>
425           <value></value>
426           <description>The password of the maintenance account. If
427           left blank, one will be generated. We recommend that the
428           password be changed periodically.</description>
429         </variable>
430
431         <variable id="maintenance_sources" type="hostname">
432           <name>Authorized Hosts</name>
433           <value></value>
434           <description>A space-separated list of IP addresses allowed
435           to access the API through the maintenance account. The value
436           of this variable is set automatically to allow only the API,
437           web, and boot servers, and should not be
438           changed.</description>
439         </variable>
440
441         <!-- The following are not actually meant to be configurable
442              as variables. The web interface should allow the file to
443              be downloaded, or its contents replaced by a file upload,
444              but the actual <value> shouldn't need to be changed.  -->
445
446         <variable id="ssl_key" type="file">
447           <name>SSL Private Key</name>
448           <value>/etc/planetlab/api_ssl.key</value>
449           <description>The SSL private key to use for encrypting HTTPS
450           traffic. If non-existent, one will be
451           generated.</description>
452         </variable>
453
454         <variable id="ssl_crt" type="file">
455           <name>SSL Public Certificate</name>
456           <value>/etc/planetlab/api_ssl.crt</value>
457           <description>The corresponding SSL public certificate. By
458           default, this certificate is self-signed. You may replace
459           the certificate later with one signed by a root
460           CA.</description>
461         </variable>
462
463         <variable id="ca_ssl_crt" type="file">
464           <name>Root CA SSL Public Certificate</name>
465           <value>/etc/planetlab/api_ca_ssl.crt</value>
466           <description>The certificate of the root CA, if any, that
467           signed your server certificate. If your server certificate is
468           self-signed, then this file is the same as your server
469           certificate.</description>
470         </variable>
471       </variablelist>
472     </category>
473
474     <category id="plc_www">
475       <name>Web Server</name>
476       <description>Web server definitions.</description>
477
478       <variablelist>
479         <variable id="enabled" type="boolean">
480           <name>Enabled</name>
481           <value>true</value>
482           <description>Enable the web server on this
483           machine.</description>
484         </variable>
485
486         <variable id="debug" type="boolean">
487           <name>Debug</name>
488           <value>false</value>
489           <description>Enable debugging output on web pages. Do not
490           enable on a production system!</description>
491         </variable>
492
493         <variable id="host" type="hostname">
494           <name>Hostname</name>
495           <value>localhost.localdomain</value>
496           <description>The fully qualified hostname of the web
497           server.</description>
498         </variable>
499
500         <variable id="ip" type="ip">
501           <name>IP Address</name>
502           <value/>
503           <description>The IP address of the web server, if not
504           resolvable.</description>
505         </variable>
506
507         <variable id="port" type="int">
508           <name>Port</name>
509           <value>80</value>
510           <description>The TCP port number through which the
511           unprotected portions of the web site should be
512           accessed.</description>
513         </variable>
514
515         <variable id="ssl_port" type="int">
516           <name>SSL Port</name>
517           <value>443</value>
518           <description>The TCP port number through which the protected
519           portions of the web site should be accessed.</description>
520         </variable>
521
522         <!-- The following are not actually meant to be configurable
523              as variables. The web interface should allow the file to
524              be downloaded, or its contents replaced by a file upload,
525              but the actual <value> shouldn't need to be changed.  -->
526
527         <variable id="ssl_key" type="file">
528           <name>SSL Private Key</name>
529           <value>/etc/planetlab/www_ssl.key</value>
530           <description>The SSL private key to use for encrypting HTTPS
531           traffic. If non-existent, one will be
532           generated.</description>
533         </variable>
534
535         <variable id="ssl_crt" type="file">
536           <name>SSL Public Certificate</name>
537           <value>/etc/planetlab/www_ssl.crt</value>
538           <description>The corresponding SSL public certificate for
539           the HTTP server. By default, this certificate is
540           self-signed. You may replace the certificate later with one
541           signed by a root CA.</description>
542         </variable>
543
544         <variable id="ca_ssl_crt" type="file">
545           <name>Root CA SSL Public Certificate</name>
546           <value>/etc/planetlab/www_ca_ssl.crt</value>
547           <description>The certificate of the root CA, if any, that
548           signed your server certificate. If your server certificate is
549           self-signed, then this file is the same as your server
550           certificate.</description>
551         </variable>
552       </variablelist>
553     </category>
554
555     <category id="plc_boot">
556       <name>Boot Server</name>
557       <description>Boot server definitions. Multiple boot servers
558       may be brought up for load balancing, but we recommend that a
559       single DNS round-robin system be implemented so that the
560       following variables are the same across all of
561       them.</description>
562
563       <variablelist>
564         <variable id="enabled" type="boolean">
565           <name>Enabled</name>
566           <value>true</value>
567           <description>Enable the boot server on this
568           machine.</description>
569         </variable>
570
571         <variable id="host" type="hostname">
572           <name>Hostname</name>
573           <value>localhost.localdomain</value>
574           <description>The fully qualified hostname of the boot
575           server.</description>
576         </variable>
577
578         <variable id="ip" type="ip">
579           <name>IP Address</name>
580           <value/>
581           <description>The IP address of the boot server, if not
582           resolvable.</description>
583         </variable>
584
585         <variable id="port" type="int">
586           <name>Port</name>
587           <value>80</value>
588           <description>The TCP port number through which the
589           unprotected portions of the boot server should be
590           accessed.</description>
591         </variable>
592
593         <variable id="ssl_port" type="int">
594           <name>SSL Port</name>
595           <value>443</value>
596           <description>The TCP port number through which the protected
597           portions of the boot server should be
598           accessed.</description>
599         </variable>
600
601         <!-- The following are not actually meant to be configurable
602              as variables. The web interface should allow the file to
603              be downloaded, or its contents replaced by a file upload,
604              but the actual <value> shouldn't need to be changed.  -->
605
606         <variable id="ssl_key" type="file">
607           <name>SSL Private Key</name>
608           <value>/etc/planetlab/boot_ssl.key</value>
609           <description>The SSL private key to use for encrypting HTTPS
610           traffic.</description>
611         </variable>
612
613         <variable id="ssl_crt" type="file">
614           <name>SSL Public Certificate</name>
615           <value>/etc/planetlab/boot_ssl.crt</value>
616           <description>The corresponding SSL public certificate for
617           the HTTP server. By default, this certificate is
618           self-signed. You may replace the certificate later with one
619           signed by a root CA.</description>
620         </variable>
621
622         <variable id="ca_ssl_crt" type="file">
623           <name>Root CA SSL Public Certificate</name>
624           <value>/etc/planetlab/boot_ca_ssl.crt</value>
625           <description>The certificate of the root CA, if any, that
626           signed your server certificate. If your server certificate is
627           self-signed, then this file is the same as your server
628           certificate.</description>
629         </variable>
630       </variablelist>
631     </category>
632
633     <category id="plc_ratelimit">
634       <name>Planetlab Ratelimit Settings</name>
635       <description>Planetlab Ratelimit Settings</description>
636       <variablelist>
637         <variable id="enabled" type="bolean">
638           <name>Enable Ratelimit</name>
639           <value>false</value>
640           <description>Enable Ratelimit for sites</description>
641         </variable>
642       </variablelist>
643     </category>
644
645     <category id="plc_omf">
646       <name>Planetlab - OMF Integration</name>
647       <description>Planetlab - OMF integration</description>
648       <variablelist>
649         <variable id="enabled" type="boolean">
650           <name>OMF integration</name>
651           <value>false</value>
652           <description>Enable OMF integration.</description>
653         </variable>
654
655         <!-- xmpp server configuration -->
656         <variable id="xmpp_server" type="string">
657           <name>XMPP server</name>
658           <value>localhost.localdomain</value>
659           <description>The fully qualified hostname of the XMPP server.</description>
660         </variable>
661
662         <variable id="xmpp_user" type="string">
663           <name>XMPP username</name>
664           <value></value>
665           <description>XMPP username (which has admin rights).</description>
666         </variable>
667
668         <variable id="xmpp_password" type="string">
669           <name>XMPP password</name>
670           <value></value>
671           <description>The password of the XMPP user.</description>
672         </variable>
673
674         <!-- omf-slicemgr -->
675         <variable id="slicemgr_url" type="string">
676           <name>OMF Slicemgr URL</name>
677           <value>http://localhost.localdomain:5053</value>
678           <description>.</description>
679         </variable>
680
681       </variablelist>
682     </category>
683
684     <category id="plc_reservation">
685       <name> Reservable Nodes</name>
686       <description> Settings related to reservable nodes </description>
687
688       <variablelist>
689         <variable id="granularity" type="int">
690           <name>Lease granularity</name>
691           <value>3600</value>
692           <description>The smallest timeslot that can be allocated to
693           a node. All leases will be rounded to this granularity, so
694           e.g. if you set 3600 all leases will start and stop at round
695           hours.</description>
696         </variable>
697       </variablelist>
698     </category>
699
700     <category id="plc_planetflow">
701       <name>PlanetFlow Service Configuration</name>
702       <description>Planetflow service definitions used in the netflow slice. </description>
703
704       <variablelist>
705         <variable id="host" type="hostname">
706                 <name>Hostname</name>
707                 <value>localhost.localdomain</value>
708                 <description>The fully qualified hostname.</description>
709         </variable>
710       </variablelist>
711     </category>
712
713     <category id="plc_monitor">
714       <name>Monitoring Service</name>
715       <description>The Monitor service that tracks node availablity and repair.</description>
716       <variablelist>
717         <variable id="enabled" type="boolean">
718           <name>Enabled</name>
719           <value>false</value>
720           <description>Enable on this machine.</description>
721         </variable>
722         <variable id="host" type="hostname">
723           <name>Hostname</name>
724           <value>localhost.localdomain</value>
725           <description>The fully qualified hostname.</description>
726         </variable>
727         <variable id="ip" type="ip">
728           <name>IP Address</name>
729           <value></value>
730           <description>The IP address of the monitor server.</description>
731         </variable>
732         <variable id="from_email" type="email">
733           <name>Monitor Email Address</name>
734           <value>root+monitor@localhost.localdomain</value>
735           <description>All messages from Monitor will appear to come from this address.</description>
736         </variable>
737         <variable id="cc_email" type="email">
738           <name>CC Email Address</name>
739           <value>root+monitor@localhost.localdomain</value>
740           <description>All messages from Monitor will be copied to this address.</description>
741         </variable>
742         <variable id="rt_queue" type="email">
743           <name>Queue Name in RT for new messages</name>
744           <value>support</value>
745           <description>All messages from Monitor will be copied to this address.</description>
746         </variable>
747         <variable id="dbhost" type="hostname">
748           <name>Database Hostname</name>
749           <value>localhost</value>
750           <description>The hostname for the monitor database.</description>
751         </variable>
752         <variable id="dbuser" type="string">
753           <name>Database User</name>
754           <value>monitoruser</value>
755           <description>The username for connecting to the monitor database.</description>
756         </variable>
757         <variable id="dbname" type="string">
758           <name>Database Name</name>
759           <value>monitor</value>
760           <description>Name of monitor database.</description>
761         </variable>
762         <variable id="dbpassword" type="password">
763           <name>Database Password</name>
764           <value></value>
765           <description>The password to use when accessing the
766           database, Monitor user account in the local PLC.</description>
767         </variable>
768
769             <variable id="ssl_key" type="file">
770                   <name>SSL Private Key</name>
771                   <value>/etc/planetlab/monitor_ssl.key</value>
772                   <description>The SSL private key to use for encrypting HTTPS
773                   traffic.</description>
774                 </variable>
775
776                 <variable id="ssl_crt" type="file">
777                   <name>SSL Public Certificate</name>
778                   <value>/etc/planetlab/monitor_ssl.crt</value>
779                   <description>The corresponding SSL public certificate for
780                   the HTTP server. By default, this certificate is
781                   self-signed. You may replace the certificate later with one
782                   signed by a root CA.</description>
783                 </variable>
784
785                 <variable id="ca_ssl_crt" type="file">
786                   <name>Root CA SSL Public Certificate</name>
787                   <value>/etc/planetlab/monitor_ca_ssl.crt</value>
788                   <description>The certificate of the root CA, if any, that
789                   signed your server certificate. If your server certificate is
790                   self-signed, then this file is the same as your server
791                   certificate.</description>
792                 </variable>
793
794       </variablelist>
795     </category>
796     <category id="plc_rt">
797       <name>RT Configuration</name>
798       <description>RT</description>
799       <variablelist>
800         <variable id="enabled" type="boolean">
801           <name>Enabled</name>
802           <value>false</value>
803           <description>Enable on this machine.</description>
804         </variable>
805         <variable id="host" type="hostname">
806           <name>Hostname</name>
807           <value>localhost.localdomain</value>
808           <description>The fully qualified hostname.</description>
809         </variable>
810         <variable id="ip" type="ip">
811           <name>IP Address</name>
812           <value/>
813           <description>The IP address of the RT server.</description>
814         </variable>
815         <variable id="cc_address" type="email">
816           <name>CC Email Address</name>
817           <value>root+cclist@localhost.localdomain</value>
818           <description>All messages to and from PLCRT will be copied to this address.</description>
819         </variable>
820         <variable id="web_user" type="string">
821           <name>root</name>
822           <value>root</value>
823           <description>Username of a privileged user in RT who can create
824                   tickets for any RT Queue.</description>
825         </variable>
826         <variable id="web_password" type="password">
827           <name>password</name>
828           <value>password</value>
829           <description>Password for RT web user.</description>
830         </variable>
831         <variable id="dbpassword" type="password">
832           <name>Database Password</name>
833           <value></value>
834           <description>Password to use when accessing the RT database.</description>
835         </variable>
836       </variablelist>
837     </category>
838     <category id="myslice">
839       <name>MySlice</name>
840       <description>MySlice configuration parameters</description>
841       <variablelist>
842         <variable id="comon_url" type="string">
843           <name>comon</name>
844           <value></value>
845           <description>The address of the CoMon url that provides information for this PLC's nodes (if not the default http://comon.cs.princeton.edu/)</description>
846         </variable>
847         <variable id="comon_available" type="boolean">
848           <name>comon</name>
849           <value>false</value>
850           <description>True, if comon data are available for this PLC's nodes</description>
851         </variable>
852         <variable id="tophat_available" type="boolean">
853           <name>tophat</name>
854           <value>false</value>
855           <description>True, if tophat data are available for this PLC's nodes</description>
856         </variable>
857       </variablelist>
858     </category>
859   </variables>
860
861   <comps>
862     <!-- deprecated - not used anymore - use .lst files instead -->
863   </comps>
864
865 </configuration>