update to 1.4.7 and change repositoyry layout as this is easier to maintain
S.Çağlar Onur [Mon, 5 Apr 2010 15:38:39 +0000 (15:38 +0000)]
339 files changed:
COPYING [deleted file]
INCOMPATIBILITIES [deleted file]
INSTALL [deleted file]
Makefile [new file with mode: 0644]
Makefile.am [deleted file]
Makefile.in [deleted file]
aclocal.m4 [deleted file]
compile [deleted file]
config.guess [deleted file]
config.h.in [deleted file]
config.sub [deleted file]
configure [deleted file]
configure.ac [deleted file]
copy-xid.patch [new file with mode: 0644]
depcomp [deleted file]
extensions/GNUmakefile.in [deleted file]
extensions/dscp_helper.c [deleted file]
extensions/libip6t_HL.c [deleted file]
extensions/libip6t_HL.man [deleted file]
extensions/libip6t_LOG.c [deleted file]
extensions/libip6t_LOG.man [deleted file]
extensions/libip6t_REJECT.c [deleted file]
extensions/libip6t_REJECT.man [deleted file]
extensions/libip6t_ah.c [deleted file]
extensions/libip6t_ah.man [deleted file]
extensions/libip6t_dst.c [deleted file]
extensions/libip6t_dst.man [deleted file]
extensions/libip6t_eui64.c [deleted file]
extensions/libip6t_eui64.man [deleted file]
extensions/libip6t_frag.c [deleted file]
extensions/libip6t_frag.man [deleted file]
extensions/libip6t_hbh.c [deleted file]
extensions/libip6t_hbh.man [deleted file]
extensions/libip6t_hl.c [deleted file]
extensions/libip6t_hl.man [deleted file]
extensions/libip6t_icmp6.c [deleted file]
extensions/libip6t_icmp6.man [deleted file]
extensions/libip6t_ipv6header.c [deleted file]
extensions/libip6t_ipv6header.man [deleted file]
extensions/libip6t_mh.c [deleted file]
extensions/libip6t_mh.man [deleted file]
extensions/libip6t_policy.c [deleted file]
extensions/libip6t_rt.c [deleted file]
extensions/libip6t_rt.man [deleted file]
extensions/libipt_CLUSTERIP.c [deleted file]
extensions/libipt_CLUSTERIP.man [deleted file]
extensions/libipt_DNAT.c [deleted file]
extensions/libipt_DNAT.man [deleted file]
extensions/libipt_ECN.c [deleted file]
extensions/libipt_ECN.man [deleted file]
extensions/libipt_LOG.c [deleted file]
extensions/libipt_LOG.man [deleted file]
extensions/libipt_MASQUERADE.c [deleted file]
extensions/libipt_MASQUERADE.man [deleted file]
extensions/libipt_MIRROR.c [deleted file]
extensions/libipt_MIRROR.man [deleted file]
extensions/libipt_NETMAP.c [deleted file]
extensions/libipt_NETMAP.man [deleted file]
extensions/libipt_REDIRECT.c [deleted file]
extensions/libipt_REDIRECT.man [deleted file]
extensions/libipt_REJECT.c [deleted file]
extensions/libipt_REJECT.man [deleted file]
extensions/libipt_SAME.c [deleted file]
extensions/libipt_SAME.man [deleted file]
extensions/libipt_SET.c [deleted file]
extensions/libipt_SET.man [deleted file]
extensions/libipt_SNAT.c [deleted file]
extensions/libipt_SNAT.man [deleted file]
extensions/libipt_TTL.c [deleted file]
extensions/libipt_TTL.man [deleted file]
extensions/libipt_ULOG.c [deleted file]
extensions/libipt_ULOG.man [deleted file]
extensions/libipt_addrtype.c [deleted file]
extensions/libipt_addrtype.man [deleted file]
extensions/libipt_ah.c [deleted file]
extensions/libipt_ah.man [deleted file]
extensions/libipt_ecn.c [deleted file]
extensions/libipt_ecn.man [deleted file]
extensions/libipt_icmp.c [deleted file]
extensions/libipt_icmp.man [deleted file]
extensions/libipt_policy.c [deleted file]
extensions/libipt_realm.c [deleted file]
extensions/libipt_realm.man [deleted file]
extensions/libipt_recent.c [deleted file]
extensions/libipt_recent.man [deleted file]
extensions/libipt_set.c [deleted file]
extensions/libipt_set.h [deleted file]
extensions/libipt_set.man [deleted file]
extensions/libipt_ttl.c [deleted file]
extensions/libipt_ttl.man [deleted file]
extensions/libipt_unclean.c [deleted file]
extensions/libipt_unclean.man [deleted file]
extensions/libxt_CLASSIFY.c [deleted file]
extensions/libxt_CLASSIFY.c.orig [deleted file]
extensions/libxt_CLASSIFY.man [deleted file]
extensions/libxt_CONNMARK.c [deleted file]
extensions/libxt_CONNMARK.man [deleted file]
extensions/libxt_CONNSECMARK.c [deleted file]
extensions/libxt_CONNSECMARK.man [deleted file]
extensions/libxt_DSCP.c [deleted file]
extensions/libxt_DSCP.man [deleted file]
extensions/libxt_MARK.c [deleted file]
extensions/libxt_MARK.c.orig [deleted file]
extensions/libxt_MARK.man [deleted file]
extensions/libxt_NFLOG.c [deleted file]
extensions/libxt_NFLOG.man [deleted file]
extensions/libxt_NFQUEUE.c [deleted file]
extensions/libxt_NFQUEUE.man [deleted file]
extensions/libxt_NOTRACK.c [deleted file]
extensions/libxt_NOTRACK.man [deleted file]
extensions/libxt_RATEEST.c [deleted file]
extensions/libxt_RATEEST.man [deleted file]
extensions/libxt_SECMARK.c [deleted file]
extensions/libxt_SECMARK.man [deleted file]
extensions/libxt_TCPMSS.c [deleted file]
extensions/libxt_TCPMSS.man [deleted file]
extensions/libxt_TCPOPTSTRIP.c [deleted file]
extensions/libxt_TCPOPTSTRIP.man [deleted file]
extensions/libxt_TOS.c [deleted file]
extensions/libxt_TOS.man [deleted file]
extensions/libxt_TRACE.c [deleted file]
extensions/libxt_TRACE.man [deleted file]
extensions/libxt_comment.c [deleted file]
extensions/libxt_comment.man [deleted file]
extensions/libxt_connbytes.c [deleted file]
extensions/libxt_connbytes.man [deleted file]
extensions/libxt_connlimit.c [deleted file]
extensions/libxt_connlimit.man [deleted file]
extensions/libxt_connmark.c [deleted file]
extensions/libxt_connmark.man [deleted file]
extensions/libxt_conntrack.c [deleted file]
extensions/libxt_conntrack.man [deleted file]
extensions/libxt_dccp.c [deleted file]
extensions/libxt_dccp.man [deleted file]
extensions/libxt_dscp.c [deleted file]
extensions/libxt_dscp.man [deleted file]
extensions/libxt_esp.c [deleted file]
extensions/libxt_esp.man [deleted file]
extensions/libxt_hashlimit.c [deleted file]
extensions/libxt_hashlimit.man [deleted file]
extensions/libxt_helper.c [deleted file]
extensions/libxt_helper.man [deleted file]
extensions/libxt_iprange.c [deleted file]
extensions/libxt_iprange.man [deleted file]
extensions/libxt_length.c [deleted file]
extensions/libxt_length.man [deleted file]
extensions/libxt_limit.c [deleted file]
extensions/libxt_limit.man [deleted file]
extensions/libxt_mac.c [deleted file]
extensions/libxt_mac.man [deleted file]
extensions/libxt_mark.c [deleted file]
extensions/libxt_mark.man [deleted file]
extensions/libxt_multiport.c [deleted file]
extensions/libxt_multiport.man [deleted file]
extensions/libxt_owner.c [deleted file]
extensions/libxt_owner.man [deleted file]
extensions/libxt_physdev.c [deleted file]
extensions/libxt_physdev.man [deleted file]
extensions/libxt_pkttype.c [deleted file]
extensions/libxt_pkttype.man [deleted file]
extensions/libxt_policy.man [deleted file]
extensions/libxt_quota.c [deleted file]
extensions/libxt_quota.man [deleted file]
extensions/libxt_rateest.c [deleted file]
extensions/libxt_sctp.c [deleted file]
extensions/libxt_sctp.man [deleted file]
extensions/libxt_standard.c [deleted file]
extensions/libxt_state.c [deleted file]
extensions/libxt_state.man [deleted file]
extensions/libxt_statistic.c [deleted file]
extensions/libxt_statistic.man [deleted file]
extensions/libxt_string.c [deleted file]
extensions/libxt_string.man [deleted file]
extensions/libxt_tcp.c [deleted file]
extensions/libxt_tcp.man [deleted file]
extensions/libxt_tcpmss.c [deleted file]
extensions/libxt_tcpmss.man [deleted file]
extensions/libxt_time.c [deleted file]
extensions/libxt_time.man [deleted file]
extensions/libxt_tos.c [deleted file]
extensions/libxt_tos.man [deleted file]
extensions/libxt_u32.c [deleted file]
extensions/libxt_u32.man [deleted file]
extensions/libxt_udp.c [deleted file]
extensions/libxt_udp.man [deleted file]
extensions/tos_values.c [deleted file]
include/ip6tables.h [deleted file]
include/iptables.h [deleted file]
include/libipq/libipq.h [deleted file]
include/libiptc/ipt_kernel_headers.h [deleted file]
include/libiptc/libip6tc.h [deleted file]
include/libiptc/libiptc.h [deleted file]
include/libiptc/libxtc.h [deleted file]
include/libipulog/libipulog.h [deleted file]
include/linux/netfilter.h [deleted file]
include/linux/netfilter/nf_conntrack_common.h [deleted file]
include/linux/netfilter/nf_conntrack_tuple.h [deleted file]
include/linux/netfilter/nf_conntrack_tuple_common.h [deleted file]
include/linux/netfilter/nf_nat.h [deleted file]
include/linux/netfilter/x_tables.h [deleted file]
include/linux/netfilter/xt_CLASSIFY.h [deleted file]
include/linux/netfilter/xt_CLASSIFY.h.orig [deleted file]
include/linux/netfilter/xt_CONNMARK.h [deleted file]
include/linux/netfilter/xt_CONNSECMARK.h [deleted file]
include/linux/netfilter/xt_DSCP.h [deleted file]
include/linux/netfilter/xt_MARK.h [deleted file]
include/linux/netfilter/xt_MARK.h.orig [deleted file]
include/linux/netfilter/xt_NFLOG.h [deleted file]
include/linux/netfilter/xt_NFQUEUE.h [deleted file]
include/linux/netfilter/xt_RATEEST.h [deleted file]
include/linux/netfilter/xt_SECMARK.h [deleted file]
include/linux/netfilter/xt_TCPMSS.h [deleted file]
include/linux/netfilter/xt_TCPOPTSTRIP.h [deleted file]
include/linux/netfilter/xt_comment.h [deleted file]
include/linux/netfilter/xt_connbytes.h [deleted file]
include/linux/netfilter/xt_connlimit.h [deleted file]
include/linux/netfilter/xt_connmark.h [deleted file]
include/linux/netfilter/xt_conntrack.h [deleted file]
include/linux/netfilter/xt_dccp.h [deleted file]
include/linux/netfilter/xt_dscp.h [deleted file]
include/linux/netfilter/xt_esp.h [deleted file]
include/linux/netfilter/xt_hashlimit.h [deleted file]
include/linux/netfilter/xt_helper.h [deleted file]
include/linux/netfilter/xt_iprange.h [deleted file]
include/linux/netfilter/xt_length.h [deleted file]
include/linux/netfilter/xt_limit.h [deleted file]
include/linux/netfilter/xt_mac.h [deleted file]
include/linux/netfilter/xt_mark.h [deleted file]
include/linux/netfilter/xt_multiport.h [deleted file]
include/linux/netfilter/xt_owner.h [deleted file]
include/linux/netfilter/xt_physdev.h [deleted file]
include/linux/netfilter/xt_pkttype.h [deleted file]
include/linux/netfilter/xt_policy.h [deleted file]
include/linux/netfilter/xt_quota.h [deleted file]
include/linux/netfilter/xt_rateest.h [deleted file]
include/linux/netfilter/xt_realm.h [deleted file]
include/linux/netfilter/xt_sctp.h [deleted file]
include/linux/netfilter/xt_state.h [deleted file]
include/linux/netfilter/xt_statistic.h [deleted file]
include/linux/netfilter/xt_string.h [deleted file]
include/linux/netfilter/xt_tcpmss.h [deleted file]
include/linux/netfilter/xt_tcpudp.h [deleted file]
include/linux/netfilter/xt_time.h [deleted file]
include/linux/netfilter/xt_u32.h [deleted file]
include/linux/netfilter_ipv4.h [deleted file]
include/linux/netfilter_ipv4/ip_set.h [deleted file]
include/linux/netfilter_ipv4/ip_tables.h [deleted file]
include/linux/netfilter_ipv4/ipt_CLUSTERIP.h [deleted file]
include/linux/netfilter_ipv4/ipt_DSCP.h [deleted file]
include/linux/netfilter_ipv4/ipt_ECN.h [deleted file]
include/linux/netfilter_ipv4/ipt_FTOS.h [deleted file]
include/linux/netfilter_ipv4/ipt_LOG.h [deleted file]
include/linux/netfilter_ipv4/ipt_REJECT.h [deleted file]
include/linux/netfilter_ipv4/ipt_SAME.h [deleted file]
include/linux/netfilter_ipv4/ipt_TOS.h [deleted file]
include/linux/netfilter_ipv4/ipt_TTL.h [deleted file]
include/linux/netfilter_ipv4/ipt_ULOG.h [deleted file]
include/linux/netfilter_ipv4/ipt_addrtype.h [deleted file]
include/linux/netfilter_ipv4/ipt_ah.h [deleted file]
include/linux/netfilter_ipv4/ipt_connlimit.h [deleted file]
include/linux/netfilter_ipv4/ipt_dscp.h [deleted file]
include/linux/netfilter_ipv4/ipt_dstlimit.h [deleted file]
include/linux/netfilter_ipv4/ipt_ecn.h [deleted file]
include/linux/netfilter_ipv4/ipt_iprange.h [deleted file]
include/linux/netfilter_ipv4/ipt_owner.h [deleted file]
include/linux/netfilter_ipv4/ipt_policy.h [deleted file]
include/linux/netfilter_ipv4/ipt_realm.h [deleted file]
include/linux/netfilter_ipv4/ipt_recent.h [deleted file]
include/linux/netfilter_ipv4/ipt_rpc.h [deleted file]
include/linux/netfilter_ipv4/ipt_set.h [deleted file]
include/linux/netfilter_ipv4/ipt_tos.h [deleted file]
include/linux/netfilter_ipv4/ipt_ttl.h [deleted file]
include/linux/netfilter_ipv6.h [deleted file]
include/linux/netfilter_ipv6/ip6_tables.h [deleted file]
include/linux/netfilter_ipv6/ip6t_HL.h [deleted file]
include/linux/netfilter_ipv6/ip6t_LOG.h [deleted file]
include/linux/netfilter_ipv6/ip6t_REJECT.h [deleted file]
include/linux/netfilter_ipv6/ip6t_TCPMSS.h [deleted file]
include/linux/netfilter_ipv6/ip6t_ah.h [deleted file]
include/linux/netfilter_ipv6/ip6t_frag.h [deleted file]
include/linux/netfilter_ipv6/ip6t_hl.h [deleted file]
include/linux/netfilter_ipv6/ip6t_ipv6header.h [deleted file]
include/linux/netfilter_ipv6/ip6t_mh.h [deleted file]
include/linux/netfilter_ipv6/ip6t_opts.h [deleted file]
include/linux/netfilter_ipv6/ip6t_owner.h [deleted file]
include/linux/netfilter_ipv6/ip6t_policy.h [deleted file]
include/linux/netfilter_ipv6/ip6t_rt.h [deleted file]
include/linux/types.h [deleted file]
include/xtables.h.in [deleted file]
include/xtables/internal.h [deleted file]
install-sh [deleted file]
ip6tables-multi.c [deleted file]
ip6tables-multi.h [deleted file]
ip6tables-restore.8 [deleted file]
ip6tables-restore.c [deleted file]
ip6tables-save.8 [deleted file]
ip6tables-save.c [deleted file]
ip6tables-standalone.c [deleted file]
ip6tables.8.in [deleted file]
ip6tables.c [deleted file]
iptables-apply [deleted file]
iptables-apply.8 [deleted file]
iptables-config
iptables-multi.c [deleted file]
iptables-multi.h [deleted file]
iptables-restore.8 [deleted file]
iptables-restore.c [deleted file]
iptables-save.8 [deleted file]
iptables-save.c [deleted file]
iptables-standalone.c [deleted file]
iptables-xml.8 [deleted file]
iptables-xml.c [deleted file]
iptables.8.in [deleted file]
iptables.c [deleted file]
iptables.init [changed mode: 0755->0644]
iptables.spec
iptables.xslt [deleted file]
libipq/Makefile.am [deleted file]
libipq/Makefile.in [deleted file]
libipq/ipq_create_handle.3 [deleted file]
libipq/ipq_destroy_handle.3 [deleted file]
libipq/ipq_errstr.3 [deleted file]
libipq/ipq_get_msgerr.3 [deleted file]
libipq/ipq_get_packet.3 [deleted file]
libipq/ipq_message_type.3 [deleted file]
libipq/ipq_perror.3 [deleted file]
libipq/ipq_read.3 [deleted file]
libipq/ipq_set_mode.3 [deleted file]
libipq/ipq_set_verdict.3 [deleted file]
libipq/libipq.3 [deleted file]
libipq/libipq.c [deleted file]
libiptc/libip4tc.c [deleted file]
libiptc/libip6tc.c [deleted file]
libiptc/libiptc.c [deleted file]
libiptc/linux_list.h [deleted file]
libiptc/linux_stddef.h [deleted file]
ltmain.sh [deleted file]
missing [deleted file]
xtables.c [deleted file]

diff --git a/COPYING b/COPYING
deleted file mode 100644 (file)
index a43ea21..0000000
--- a/COPYING
+++ /dev/null
@@ -1,339 +0,0 @@
-                   GNU GENERAL PUBLIC LICENSE
-                      Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                           Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-\f
-                   GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-\f
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-\f
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-\f
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                           NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                    END OF TERMS AND CONDITIONS
-\f
-       Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/INCOMPATIBILITIES b/INCOMPATIBILITIES
deleted file mode 100644 (file)
index ddb2408..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-INCOMPATIBILITIES:
-
-- The REJECT target has an '--reject-with admin-prohib' option which used
-  with kernels that do not support it, will result in a plain DROP instead
-  of REJECT.  Use with caution.
-  Kernels that do support it:
-       2.4 - since 2.4.22-pre9
-       2.6 - all
-
-- There are some issues related to upgrading from 1.2.x to 1.3.x on a system
-  with dynamic ruleset changes during runtime. (Please see 
-  https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=334).
-  After upgrading from 1.2 to 1.3, it suggest go do an iptables-save, then
-  iptables-restore to ensure your dynamic rule changes continue to work.
diff --git a/INSTALL b/INSTALL
deleted file mode 100644 (file)
index 4a44989..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,80 +0,0 @@
-Installation instructions for iptables
-======================================
-
-iptables uses the well-known configure(autotools) infrastructure.
-
-       $ ./configure
-       $ make
-       # make install
-
-
-Prerequisites
-=============
-
-       * no kernel-source required
-
-       * but obviously a compiler, glibc-devel and linux-kernel-headers
-         (/usr/include/linux)
-
-
-Configuring and compiling
-=========================
-
-./configure [options]
-
---prefix=
-
-       The prefix to put all installed files under. It defaults to
-       /usr/local, so the binaries will go into /usr/local/bin, sbin,
-       manpages into /usr/local/share/man, etc.
-
---with-xtlibdir=
-
-       The path to where Xtables extensions should be installed to. It
-       defaults to ${prefix}/libexec/xtables.
-
---enable-devel (or --disable-devel)
-
-       This option causes development files to be installed to
-       ${includedir}, which is needed for building additional packages,
-       such as Xtables-addons or other 3rd-party extensions.
-
-       It is enabled by default.
-
---enable-libipq
-
-       This option causes libipq to be installed into ${libdir} and
-       ${includedir}.
-
---enable-static
-
-       Enable building single standalone multipurpose binaries,
-       (iptables-static and ip6tables-static), which contain every
-       extension compiled-in (and does not support additional
-       extensions).
-
---with-ksource=
-
-       Xtables does not depend on kernel headers anymore, but you can
-       optionally specify a search path to include anyway. This is
-       probably only useful for development.
-
-If you want to enable debugging, use
-
-       ./configure CFLAGS="-ggdb3 -O0"
-
-(-O0 is used to turn off instruction reordering, which makes debugging
-much easier.)
-
-
-Other notes
-===========
-
-The make process will automatically build multipurpose binaries.
-These have the core (iptables), -save, -restore and -xml code
-compiled into one binary, but extensions remain as modules.
-
-If you want to build a statically linked version of the iptables binary,
-without the need for loading the plugins at runtime (e.g. for an
-embedded device or router-on-a-disk), you can use the --enable-static
-configure flag.
diff --git a/Makefile b/Makefile
new file mode 100644 (file)
index 0000000..3c3167f
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,62 @@
+# $Id$
+# $URL$
+#
+WEBFETCH               := wget
+SHA1SUM                        := sha1sum
+
+ALL                    += iptables
+iptables-URL           := http://www.netfilter.org/projects/iptables/files/iptables-1.4.7.tar.bz2
+iptables-SHA1SUM       := 825594a2c5017852b03ce441f592c67070b4b29c
+iptables               := $(notdir $(iptables-URL))
+
+all: $(ALL)
+.PHONY: all
+
+##############################
+define download_target
+$(1): $($(1))
+.PHONY: $($(1))
+$($(1)): 
+       @if [ ! -e "$($(1))" ] ; then echo "$(WEBFETCH) $($(1)-URL)" ; $(WEBFETCH) $($(1)-URL) ; fi
+       @if [ ! -e "$($(1))" ] ; then echo "Could not download source file: $($(1)) does not exist" ; exit 1 ; fi
+       @if test "$$$$($(SHA1SUM) $($(1)) | awk '{print $$$$1}')" != "$($(1)-SHA1SUM)" ; then \
+           echo "sha1sum of the downloaded $($(1)) does not match the one from 'Makefile'" ; \
+           echo "Local copy: $$$$($(SHA1SUM) $($(1)))" ; \
+           echo "In Makefile: $($(1)-SHA1SUM)" ; \
+           false ; \
+       else \
+           ls -l $($(1)) ; \
+       fi
+endef
+
+$(eval $(call download_target,iptables))
+
+sources: $(ALL) 
+.PHONY: sources
+
+####################
+# default - overridden by the build
+SPECFILE = iptables.spec
+
+PWD=$(shell pwd)
+PREPARCH ?= noarch
+RPMDIRDEFS = --define "_sourcedir $(PWD)" --define "_builddir $(PWD)" --define "_srcrpmdir $(PWD)" --define "_rpmdir $(PWD)"
+trees: sources
+       rpmbuild $(RPMDIRDEFS) $(RPMDEFS) --nodeps -bp --target $(PREPARCH) $(SPECFILE)
+
+srpm: sources
+       rpmbuild $(RPMDIRDEFS) $(RPMDEFS) --nodeps -bs $(SPECFILE)
+
+TARGET ?= $(shell uname -m)
+rpm: sources
+       rpmbuild $(RPMDIRDEFS) $(RPMDEFS) --nodeps --target $(TARGET) -bb $(SPECFILE)
+
+clean:
+       rm -f *.rpm *.tgz *.bz2 *.gz
+
+++%: varname=$(subst +,,$@)
+++%:
+       @echo "$(varname)=$($(varname))"
++%: varname=$(subst +,,$@)
++%:
+       @echo "$($(varname))"
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644 (file)
index 49edbf8..0000000
+++ /dev/null
@@ -1,104 +0,0 @@
-# -*- Makefile -*-
-
-AUTOMAKE_OPTIONS = foreign subdir-objects
-
-AM_CFLAGS        = ${regular_CFLAGS} -I${top_builddir}/include -I${top_srcdir}/include ${kinclude_CFLAGS}
-SUBDIRS         := extensions
-if ENABLE_LIBIPQ
-SUBDIRS         += libipq
-endif
-
-# libiptc
-libiptc_libiptc_a_SOURCES = libiptc/libip4tc.c libiptc/libip6tc.c
-
-# iptables, dynamic
-iptables_SOURCES          = iptables-standalone.c iptables.c xtables.c
-iptables_LDFLAGS          = -rdynamic
-iptables_LDADD            = -ldl -lm libiptc/libiptc.a extensions/libext4.a
-
-iptables_multi_SOURCES    = iptables-multi.c iptables-save.c \
-                            iptables-restore.c iptables-xml.c \
-                            iptables-standalone.c iptables.c xtables.c
-iptables_multi_CFLAGS     = ${AM_CFLAGS} -DIPTABLES_MULTI
-iptables_multi_LDFLAGS    = ${iptables_LDFLAGS}
-iptables_multi_LDADD      = ${iptables_LDADD}
-
-iptables_restore_SOURCES  = iptables-restore.c iptables.c xtables.c
-iptables_restore_LDFLAGS  = ${iptables_LDFLAGS}
-iptables_restore_LDADD    = ${iptables_LDADD}
-
-iptables_save_SOURCES     = iptables-save.c iptables.c xtables.c
-iptables_save_LDFLAGS     = ${iptables_LDFLAGS}
-iptables_save_LDADD       = ${iptables_LDADD}
-
-# iptables-multi, semi-static
-iptables_static_SOURCES   = ${iptables_multi_SOURCES}
-iptables_static_CFLAGS    = ${iptables_multi_CFLAGS} -DNO_SHARED_LIBS=1
-iptables_static_LDADD     = -lm libiptc/libiptc.a extensions/libext4.a
-
-iptables_xml_SOURCES      = iptables-xml.c
-
-# ip6tables, dynamic
-ip6tables_SOURCES         = ip6tables-standalone.c ip6tables.c xtables.c
-ip6tables_LDFLAGS         = -rdynamic
-ip6tables_LDADD           = -ldl -lm libiptc/libiptc.a extensions/libext6.a
-
-ip6tables_multi_SOURCES   = ip6tables-multi.c ip6tables-save.c \
-                            ip6tables-restore.c ip6tables-standalone.c \
-                            ip6tables.c xtables.c
-ip6tables_multi_CFLAGS    = ${AM_CFLAGS} -DIPTABLES_MULTI
-ip6tables_multi_LDFLAGS   = ${ip6tables_LDFLAGS}
-ip6tables_multi_LDADD     = ${ip6tables_LDADD}
-
-ip6tables_restore_SOURCES = ip6tables-restore.c ip6tables.c xtables.c
-ip6tables_restore_LDFLAGS = ${ip6tables_LDFLAGS}
-ip6tables_restore_LDADD   = ${ip6tables_LDADD}
-
-ip6tables_save_SOURCES    = ip6tables-save.c ip6tables.c xtables.c
-ip6tables_save_LDFLAGS    = ${ip6tables_LDFLAGS}
-ip6tables_save_LDADD      = ${ip6tables_LDADD}
-
-# iptables-multi, semi-static
-ip6tables_static_SOURCES    = ${ip6tables_multi_SOURCES}
-ip6tables_static_CFLAGS     = ${ip6tables_multi_CFLAGS} -DNO_SHARED_LIBS=1
-ip6tables_static_LDADD      = -lm libiptc/libiptc.a extensions/libext6.a
-
-noinst_LIBRARIES := libiptc/libiptc.a
-bin_PROGRAMS     := iptables-xml
-sbin_PROGRAMS    :=
-noinst_PROGRAMS  :=
-man_MANS         := iptables.8 iptables-restore.8 iptables-save.8 \
-                    iptables-xml.8 ip6tables.8 ip6tables-restore.8 \
-                    ip6tables-save.8
-CLEANFILES       := iptables.8 ip6tables.8
-if ENABLE_DEVEL
-include_HEADERS  := include/xtables.h include/iptables.h include/ip6tables.h
-iptcdir           = ${includedir}/libiptc
-iptc_HEADERS     := include/libiptc/libxtc.h \
-                    include/libiptc/ipt_kernel_headers.h
-endif
-
-if ENABLE_STATIC
-sbin_PROGRAMS += iptables-static ip6tables-static
-endif
-if ENABLE_SHARED
-sbin_PROGRAMS += iptables iptables-multi iptables-restore iptables-save \
-                 ip6tables ip6tables-multi ip6tables-restore ip6tables-save
-endif
-
-iptables.8: ${srcdir}/iptables.8.in extensions/matches4.man extensions/targets4.man
-       ${AM_VERBOSE_GEN} sed -e '/@MATCH@/ r extensions/matches4.man' -e '/@TARGET@/ r extensions/targets4.man' $< >$@;
-
-ip6tables.8: ${srcdir}/ip6tables.8.in extensions/matches6.man extensions/targets6.man
-       ${AM_VERBOSE_GEN} sed -e '/@MATCH@/ r extensions/matches6.man' -e '/@TARGET@/ r extensions/targets6.man' $< >$@;
-
-extensions/%:
-       ${MAKE} ${AM_MAKEFLAGS} -C $(@D) $(@F)
-
-.PHONY: tarball
-tarball:
-       rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION};
-       pushd ${top_srcdir} && git-archive --prefix=${PACKAGE_TARNAME}-${PACKAGE_VERSION}/ HEAD | tar -C /tmp -x && popd;
-       pushd /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION} && ./autogen.sh && popd;
-       tar -C /tmp -cjf ${PACKAGE_TARNAME}-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ${PACKAGE_TARNAME}-${PACKAGE_VERSION}/;
-       rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION};
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644 (file)
index dbd8e5f..0000000
+++ /dev/null
@@ -1,1511 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# -*- Makefile -*-
-
-
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@ENABLE_LIBIPQ_TRUE@am__append_1 = libipq
-bin_PROGRAMS = iptables-xml$(EXEEXT)
-sbin_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2)
-noinst_PROGRAMS =
-@ENABLE_STATIC_TRUE@am__append_2 = iptables-static ip6tables-static
-@ENABLE_SHARED_TRUE@am__append_3 = iptables iptables-multi iptables-restore iptables-save \
-@ENABLE_SHARED_TRUE@                 ip6tables ip6tables-multi ip6tables-restore ip6tables-save
-
-DIST_COMMON = $(am__configure_deps) $(am__include_HEADERS_DIST) \
-       $(am__iptc_HEADERS_DIST) $(srcdir)/Makefile.am \
-       $(srcdir)/Makefile.in $(srcdir)/config.h.in \
-       $(top_srcdir)/configure \
-       $(top_srcdir)/extensions/GNUmakefile.in \
-       $(top_srcdir)/include/xtables.h.in COPYING INSTALL compile \
-       config.guess config.sub depcomp install-sh ltmain.sh missing
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-       $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = extensions/GNUmakefile include/xtables.h
-LIBRARIES = $(noinst_LIBRARIES)
-ARFLAGS = cru
-libiptc_libiptc_a_AR = $(AR) $(ARFLAGS)
-libiptc_libiptc_a_LIBADD =
-am__dirstamp = $(am__leading_dot)dirstamp
-am_libiptc_libiptc_a_OBJECTS = libiptc/libip4tc.$(OBJEXT) \
-       libiptc/libip6tc.$(OBJEXT)
-libiptc_libiptc_a_OBJECTS = $(am_libiptc_libiptc_a_OBJECTS)
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \
-       "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(includedir)" \
-       "$(DESTDIR)$(iptcdir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-@ENABLE_STATIC_TRUE@am__EXEEXT_1 = iptables-static$(EXEEXT) \
-@ENABLE_STATIC_TRUE@   ip6tables-static$(EXEEXT)
-@ENABLE_SHARED_TRUE@am__EXEEXT_2 = iptables$(EXEEXT) \
-@ENABLE_SHARED_TRUE@   iptables-multi$(EXEEXT) \
-@ENABLE_SHARED_TRUE@   iptables-restore$(EXEEXT) \
-@ENABLE_SHARED_TRUE@   iptables-save$(EXEEXT) ip6tables$(EXEEXT) \
-@ENABLE_SHARED_TRUE@   ip6tables-multi$(EXEEXT) \
-@ENABLE_SHARED_TRUE@   ip6tables-restore$(EXEEXT) \
-@ENABLE_SHARED_TRUE@   ip6tables-save$(EXEEXT)
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) $(sbin_PROGRAMS)
-am_ip6tables_OBJECTS = ip6tables-standalone.$(OBJEXT) \
-       ip6tables.$(OBJEXT) xtables.$(OBJEXT)
-ip6tables_OBJECTS = $(am_ip6tables_OBJECTS)
-ip6tables_DEPENDENCIES = libiptc/libiptc.a extensions/libext6.a
-am_ip6tables_multi_OBJECTS =  \
-       ip6tables_multi-ip6tables-multi.$(OBJEXT) \
-       ip6tables_multi-ip6tables-save.$(OBJEXT) \
-       ip6tables_multi-ip6tables-restore.$(OBJEXT) \
-       ip6tables_multi-ip6tables-standalone.$(OBJEXT) \
-       ip6tables_multi-ip6tables.$(OBJEXT) \
-       ip6tables_multi-xtables.$(OBJEXT)
-ip6tables_multi_OBJECTS = $(am_ip6tables_multi_OBJECTS)
-am__DEPENDENCIES_1 = libiptc/libiptc.a extensions/libext6.a
-ip6tables_multi_DEPENDENCIES = $(am__DEPENDENCIES_1)
-am_ip6tables_restore_OBJECTS = ip6tables-restore.$(OBJEXT) \
-       ip6tables.$(OBJEXT) xtables.$(OBJEXT)
-ip6tables_restore_OBJECTS = $(am_ip6tables_restore_OBJECTS)
-ip6tables_restore_DEPENDENCIES = $(am__DEPENDENCIES_1)
-am_ip6tables_save_OBJECTS = ip6tables-save.$(OBJEXT) \
-       ip6tables.$(OBJEXT) xtables.$(OBJEXT)
-ip6tables_save_OBJECTS = $(am_ip6tables_save_OBJECTS)
-ip6tables_save_DEPENDENCIES = $(am__DEPENDENCIES_1)
-am__objects_1 = ip6tables_static-ip6tables-multi.$(OBJEXT) \
-       ip6tables_static-ip6tables-save.$(OBJEXT) \
-       ip6tables_static-ip6tables-restore.$(OBJEXT) \
-       ip6tables_static-ip6tables-standalone.$(OBJEXT) \
-       ip6tables_static-ip6tables.$(OBJEXT) \
-       ip6tables_static-xtables.$(OBJEXT)
-am_ip6tables_static_OBJECTS = $(am__objects_1)
-ip6tables_static_OBJECTS = $(am_ip6tables_static_OBJECTS)
-ip6tables_static_DEPENDENCIES = libiptc/libiptc.a extensions/libext6.a
-am_iptables_OBJECTS = iptables-standalone.$(OBJEXT) iptables.$(OBJEXT) \
-       xtables.$(OBJEXT)
-iptables_OBJECTS = $(am_iptables_OBJECTS)
-iptables_DEPENDENCIES = libiptc/libiptc.a extensions/libext4.a
-am_iptables_multi_OBJECTS = iptables_multi-iptables-multi.$(OBJEXT) \
-       iptables_multi-iptables-save.$(OBJEXT) \
-       iptables_multi-iptables-restore.$(OBJEXT) \
-       iptables_multi-iptables-xml.$(OBJEXT) \
-       iptables_multi-iptables-standalone.$(OBJEXT) \
-       iptables_multi-iptables.$(OBJEXT) \
-       iptables_multi-xtables.$(OBJEXT)
-iptables_multi_OBJECTS = $(am_iptables_multi_OBJECTS)
-am__DEPENDENCIES_2 = libiptc/libiptc.a extensions/libext4.a
-iptables_multi_DEPENDENCIES = $(am__DEPENDENCIES_2)
-am_iptables_restore_OBJECTS = iptables-restore.$(OBJEXT) \
-       iptables.$(OBJEXT) xtables.$(OBJEXT)
-iptables_restore_OBJECTS = $(am_iptables_restore_OBJECTS)
-iptables_restore_DEPENDENCIES = $(am__DEPENDENCIES_2)
-am_iptables_save_OBJECTS = iptables-save.$(OBJEXT) iptables.$(OBJEXT) \
-       xtables.$(OBJEXT)
-iptables_save_OBJECTS = $(am_iptables_save_OBJECTS)
-iptables_save_DEPENDENCIES = $(am__DEPENDENCIES_2)
-am__objects_2 = iptables_static-iptables-multi.$(OBJEXT) \
-       iptables_static-iptables-save.$(OBJEXT) \
-       iptables_static-iptables-restore.$(OBJEXT) \
-       iptables_static-iptables-xml.$(OBJEXT) \
-       iptables_static-iptables-standalone.$(OBJEXT) \
-       iptables_static-iptables.$(OBJEXT) \
-       iptables_static-xtables.$(OBJEXT)
-am_iptables_static_OBJECTS = $(am__objects_2)
-iptables_static_OBJECTS = $(am_iptables_static_OBJECTS)
-iptables_static_DEPENDENCIES = libiptc/libiptc.a extensions/libext4.a
-am_iptables_xml_OBJECTS = iptables-xml.$(OBJEXT)
-iptables_xml_OBJECTS = $(am_iptables_xml_OBJECTS)
-iptables_xml_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-       $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
-       $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-       $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-       $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libiptc_libiptc_a_SOURCES) $(ip6tables_SOURCES) \
-       $(ip6tables_multi_SOURCES) $(ip6tables_restore_SOURCES) \
-       $(ip6tables_save_SOURCES) $(ip6tables_static_SOURCES) \
-       $(iptables_SOURCES) $(iptables_multi_SOURCES) \
-       $(iptables_restore_SOURCES) $(iptables_save_SOURCES) \
-       $(iptables_static_SOURCES) $(iptables_xml_SOURCES)
-DIST_SOURCES = $(libiptc_libiptc_a_SOURCES) $(ip6tables_SOURCES) \
-       $(ip6tables_multi_SOURCES) $(ip6tables_restore_SOURCES) \
-       $(ip6tables_save_SOURCES) $(ip6tables_static_SOURCES) \
-       $(iptables_SOURCES) $(iptables_multi_SOURCES) \
-       $(iptables_restore_SOURCES) $(iptables_save_SOURCES) \
-       $(iptables_static_SOURCES) $(iptables_xml_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-       html-recursive info-recursive install-data-recursive \
-       install-exec-recursive install-info-recursive \
-       install-recursive installcheck-recursive installdirs-recursive \
-       pdf-recursive ps-recursive uninstall-info-recursive \
-       uninstall-recursive
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-am__include_HEADERS_DIST = include/xtables.h include/iptables.h \
-       include/ip6tables.h
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-includeHEADERS_INSTALL = $(INSTALL_HEADER)
-am__iptc_HEADERS_DIST = include/libiptc/libxtc.h \
-       include/libiptc/ipt_kernel_headers.h
-iptcHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(include_HEADERS) $(iptc_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = extensions libipq
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLE_DEVEL_FALSE = @ENABLE_DEVEL_FALSE@
-ENABLE_DEVEL_TRUE = @ENABLE_DEVEL_TRUE@
-ENABLE_LIBIPQ_FALSE = @ENABLE_LIBIPQ_FALSE@
-ENABLE_LIBIPQ_TRUE = @ENABLE_LIBIPQ_TRUE@
-ENABLE_SHARED_FALSE = @ENABLE_SHARED_FALSE@
-ENABLE_SHARED_TRUE = @ENABLE_SHARED_TRUE@
-ENABLE_STATIC_FALSE = @ENABLE_STATIC_FALSE@
-ENABLE_STATIC_TRUE = @ENABLE_STATIC_TRUE@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-XTABLES_VERSION_EXTRA = @XTABLES_VERSION_EXTRA@
-XTABLES_VERSION_MAJOR = @XTABLES_VERSION_MAJOR@
-XTABLES_VERSION_MINOR = @XTABLES_VERSION_MINOR@
-XTABLES_VERSION_PATCH = @XTABLES_VERSION_PATCH@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-blacklist_modules = @blacklist_modules@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-kbuilddir = @kbuilddir@
-kinclude_CFLAGS = @kinclude_CFLAGS@
-ksourcedir = @ksourcedir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-regular_CFLAGS = @regular_CFLAGS@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-xtlibdir = @xtlibdir@
-AUTOMAKE_OPTIONS = foreign subdir-objects
-AM_CFLAGS = ${regular_CFLAGS} -I${top_builddir}/include -I${top_srcdir}/include ${kinclude_CFLAGS}
-SUBDIRS := extensions $(am__append_1)
-
-# libiptc
-libiptc_libiptc_a_SOURCES = libiptc/libip4tc.c libiptc/libip6tc.c
-
-# iptables, dynamic
-iptables_SOURCES = iptables-standalone.c iptables.c xtables.c
-iptables_LDFLAGS = -rdynamic
-iptables_LDADD = -ldl -lm libiptc/libiptc.a extensions/libext4.a
-iptables_multi_SOURCES = iptables-multi.c iptables-save.c \
-                            iptables-restore.c iptables-xml.c \
-                            iptables-standalone.c iptables.c xtables.c
-
-iptables_multi_CFLAGS = ${AM_CFLAGS} -DIPTABLES_MULTI
-iptables_multi_LDFLAGS = ${iptables_LDFLAGS}
-iptables_multi_LDADD = ${iptables_LDADD}
-iptables_restore_SOURCES = iptables-restore.c iptables.c xtables.c
-iptables_restore_LDFLAGS = ${iptables_LDFLAGS}
-iptables_restore_LDADD = ${iptables_LDADD}
-iptables_save_SOURCES = iptables-save.c iptables.c xtables.c
-iptables_save_LDFLAGS = ${iptables_LDFLAGS}
-iptables_save_LDADD = ${iptables_LDADD}
-
-# iptables-multi, semi-static
-iptables_static_SOURCES = ${iptables_multi_SOURCES}
-iptables_static_CFLAGS = ${iptables_multi_CFLAGS} -DNO_SHARED_LIBS=1
-iptables_static_LDADD = -lm libiptc/libiptc.a extensions/libext4.a
-iptables_xml_SOURCES = iptables-xml.c
-
-# ip6tables, dynamic
-ip6tables_SOURCES = ip6tables-standalone.c ip6tables.c xtables.c
-ip6tables_LDFLAGS = -rdynamic
-ip6tables_LDADD = -ldl -lm libiptc/libiptc.a extensions/libext6.a
-ip6tables_multi_SOURCES = ip6tables-multi.c ip6tables-save.c \
-                            ip6tables-restore.c ip6tables-standalone.c \
-                            ip6tables.c xtables.c
-
-ip6tables_multi_CFLAGS = ${AM_CFLAGS} -DIPTABLES_MULTI
-ip6tables_multi_LDFLAGS = ${ip6tables_LDFLAGS}
-ip6tables_multi_LDADD = ${ip6tables_LDADD}
-ip6tables_restore_SOURCES = ip6tables-restore.c ip6tables.c xtables.c
-ip6tables_restore_LDFLAGS = ${ip6tables_LDFLAGS}
-ip6tables_restore_LDADD = ${ip6tables_LDADD}
-ip6tables_save_SOURCES = ip6tables-save.c ip6tables.c xtables.c
-ip6tables_save_LDFLAGS = ${ip6tables_LDFLAGS}
-ip6tables_save_LDADD = ${ip6tables_LDADD}
-
-# iptables-multi, semi-static
-ip6tables_static_SOURCES = ${ip6tables_multi_SOURCES}
-ip6tables_static_CFLAGS = ${ip6tables_multi_CFLAGS} -DNO_SHARED_LIBS=1
-ip6tables_static_LDADD = -lm libiptc/libiptc.a extensions/libext6.a
-noinst_LIBRARIES := libiptc/libiptc.a
-man_MANS := iptables.8 iptables-restore.8 iptables-save.8 \
-                    iptables-xml.8 ip6tables.8 ip6tables-restore.8 \
-                    ip6tables-save.8
-
-CLEANFILES := iptables.8 ip6tables.8
-@ENABLE_DEVEL_TRUE@include_HEADERS := include/xtables.h include/iptables.h include/ip6tables.h
-@ENABLE_DEVEL_TRUE@iptcdir = ${includedir}/libiptc
-@ENABLE_DEVEL_TRUE@iptc_HEADERS := include/libiptc/libxtc.h \
-@ENABLE_DEVEL_TRUE@                    include/libiptc/ipt_kernel_headers.h
-
-all: config.h
-       $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-       @:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-       @for dep in $?; do \
-         case '$(am__configure_deps)' in \
-           *$$dep*) \
-             echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-             cd $(srcdir) && $(AUTOMAKE) --foreign  \
-               && exit 0; \
-             exit 1;; \
-         esac; \
-       done; \
-       echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-       cd $(top_srcdir) && \
-         $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-       @case '$?' in \
-         *config.status*) \
-           echo ' $(SHELL) ./config.status'; \
-           $(SHELL) ./config.status;; \
-         *) \
-           echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-           cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-       esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-       $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-       cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-       cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-       @if test ! -f $@; then \
-         rm -f stamp-h1; \
-         $(MAKE) stamp-h1; \
-       else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-       @rm -f stamp-h1
-       cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-       cd $(top_srcdir) && $(AUTOHEADER)
-       rm -f stamp-h1
-       touch $@
-
-distclean-hdr:
-       -rm -f config.h stamp-h1
-extensions/GNUmakefile: $(top_builddir)/config.status $(top_srcdir)/extensions/GNUmakefile.in
-       cd $(top_builddir) && $(SHELL) ./config.status $@
-include/xtables.h: $(top_builddir)/config.status $(top_srcdir)/include/xtables.h.in
-       cd $(top_builddir) && $(SHELL) ./config.status $@
-
-clean-noinstLIBRARIES:
-       -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libiptc/$(am__dirstamp):
-       @$(mkdir_p) libiptc
-       @: > libiptc/$(am__dirstamp)
-libiptc/$(DEPDIR)/$(am__dirstamp):
-       @$(mkdir_p) libiptc/$(DEPDIR)
-       @: > libiptc/$(DEPDIR)/$(am__dirstamp)
-libiptc/libip4tc.$(OBJEXT): libiptc/$(am__dirstamp) \
-       libiptc/$(DEPDIR)/$(am__dirstamp)
-libiptc/libip6tc.$(OBJEXT): libiptc/$(am__dirstamp) \
-       libiptc/$(DEPDIR)/$(am__dirstamp)
-libiptc/libiptc.a: $(libiptc_libiptc_a_OBJECTS) $(libiptc_libiptc_a_DEPENDENCIES) libiptc/$(am__dirstamp)
-       -rm -f libiptc/libiptc.a
-       $(libiptc_libiptc_a_AR) libiptc/libiptc.a $(libiptc_libiptc_a_OBJECTS) $(libiptc_libiptc_a_LIBADD)
-       $(RANLIB) libiptc/libiptc.a
-install-binPROGRAMS: $(bin_PROGRAMS)
-       @$(NORMAL_INSTALL)
-       test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-       @list='$(bin_PROGRAMS)'; for p in $$list; do \
-         p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         if test -f $$p \
-            || test -f $$p1 \
-         ; then \
-           f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-          echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-          $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-         else :; fi; \
-       done
-
-uninstall-binPROGRAMS:
-       @$(NORMAL_UNINSTALL)
-       @list='$(bin_PROGRAMS)'; for p in $$list; do \
-         f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-         echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-         rm -f "$(DESTDIR)$(bindir)/$$f"; \
-       done
-
-clean-binPROGRAMS:
-       @list='$(bin_PROGRAMS)'; for p in $$list; do \
-         f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         echo " rm -f $$p $$f"; \
-         rm -f $$p $$f ; \
-       done
-
-clean-noinstPROGRAMS:
-       @list='$(noinst_PROGRAMS)'; for p in $$list; do \
-         f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         echo " rm -f $$p $$f"; \
-         rm -f $$p $$f ; \
-       done
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
-       @$(NORMAL_INSTALL)
-       test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)"
-       @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-         p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         if test -f $$p \
-            || test -f $$p1 \
-         ; then \
-           f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-          echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
-          $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
-         else :; fi; \
-       done
-
-uninstall-sbinPROGRAMS:
-       @$(NORMAL_UNINSTALL)
-       @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-         f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-         echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
-         rm -f "$(DESTDIR)$(sbindir)/$$f"; \
-       done
-
-clean-sbinPROGRAMS:
-       @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-         f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         echo " rm -f $$p $$f"; \
-         rm -f $$p $$f ; \
-       done
-ip6tables$(EXEEXT): $(ip6tables_OBJECTS) $(ip6tables_DEPENDENCIES) 
-       @rm -f ip6tables$(EXEEXT)
-       $(LINK) $(ip6tables_LDFLAGS) $(ip6tables_OBJECTS) $(ip6tables_LDADD) $(LIBS)
-ip6tables-multi$(EXEEXT): $(ip6tables_multi_OBJECTS) $(ip6tables_multi_DEPENDENCIES) 
-       @rm -f ip6tables-multi$(EXEEXT)
-       $(LINK) $(ip6tables_multi_LDFLAGS) $(ip6tables_multi_OBJECTS) $(ip6tables_multi_LDADD) $(LIBS)
-ip6tables-restore$(EXEEXT): $(ip6tables_restore_OBJECTS) $(ip6tables_restore_DEPENDENCIES) 
-       @rm -f ip6tables-restore$(EXEEXT)
-       $(LINK) $(ip6tables_restore_LDFLAGS) $(ip6tables_restore_OBJECTS) $(ip6tables_restore_LDADD) $(LIBS)
-ip6tables-save$(EXEEXT): $(ip6tables_save_OBJECTS) $(ip6tables_save_DEPENDENCIES) 
-       @rm -f ip6tables-save$(EXEEXT)
-       $(LINK) $(ip6tables_save_LDFLAGS) $(ip6tables_save_OBJECTS) $(ip6tables_save_LDADD) $(LIBS)
-ip6tables-static$(EXEEXT): $(ip6tables_static_OBJECTS) $(ip6tables_static_DEPENDENCIES) 
-       @rm -f ip6tables-static$(EXEEXT)
-       $(LINK) $(ip6tables_static_LDFLAGS) $(ip6tables_static_OBJECTS) $(ip6tables_static_LDADD) $(LIBS)
-iptables$(EXEEXT): $(iptables_OBJECTS) $(iptables_DEPENDENCIES) 
-       @rm -f iptables$(EXEEXT)
-       $(LINK) $(iptables_LDFLAGS) $(iptables_OBJECTS) $(iptables_LDADD) $(LIBS)
-iptables-multi$(EXEEXT): $(iptables_multi_OBJECTS) $(iptables_multi_DEPENDENCIES) 
-       @rm -f iptables-multi$(EXEEXT)
-       $(LINK) $(iptables_multi_LDFLAGS) $(iptables_multi_OBJECTS) $(iptables_multi_LDADD) $(LIBS)
-iptables-restore$(EXEEXT): $(iptables_restore_OBJECTS) $(iptables_restore_DEPENDENCIES) 
-       @rm -f iptables-restore$(EXEEXT)
-       $(LINK) $(iptables_restore_LDFLAGS) $(iptables_restore_OBJECTS) $(iptables_restore_LDADD) $(LIBS)
-iptables-save$(EXEEXT): $(iptables_save_OBJECTS) $(iptables_save_DEPENDENCIES) 
-       @rm -f iptables-save$(EXEEXT)
-       $(LINK) $(iptables_save_LDFLAGS) $(iptables_save_OBJECTS) $(iptables_save_LDADD) $(LIBS)
-iptables-static$(EXEEXT): $(iptables_static_OBJECTS) $(iptables_static_DEPENDENCIES) 
-       @rm -f iptables-static$(EXEEXT)
-       $(LINK) $(iptables_static_LDFLAGS) $(iptables_static_OBJECTS) $(iptables_static_LDADD) $(LIBS)
-iptables-xml$(EXEEXT): $(iptables_xml_OBJECTS) $(iptables_xml_DEPENDENCIES) 
-       @rm -f iptables-xml$(EXEEXT)
-       $(LINK) $(iptables_xml_LDFLAGS) $(iptables_xml_OBJECTS) $(iptables_xml_LDADD) $(LIBS)
-
-mostlyclean-compile:
-       -rm -f *.$(OBJEXT)
-       -rm -f libiptc/libip4tc.$(OBJEXT)
-       -rm -f libiptc/libip6tc.$(OBJEXT)
-
-distclean-compile:
-       -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables-restore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables-save.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables-standalone.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_multi-ip6tables-multi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_multi-ip6tables-restore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_multi-ip6tables-save.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_multi-ip6tables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_multi-xtables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_static-ip6tables-multi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_static-ip6tables-restore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_static-ip6tables-save.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_static-ip6tables-standalone.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_static-ip6tables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip6tables_static-xtables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables-restore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables-save.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables-standalone.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables-xml.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-iptables-multi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-iptables-restore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-iptables-save.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-iptables-standalone.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-iptables-xml.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-iptables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_multi-xtables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-iptables-multi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-iptables-restore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-iptables-save.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-iptables-standalone.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-iptables-xml.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-iptables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iptables_static-xtables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xtables.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@libiptc/$(DEPDIR)/libip4tc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@libiptc/$(DEPDIR)/libip6tc.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@   depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \
-@am__fastdepCC_TRUE@   if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@   then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@   depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \
-@am__fastdepCC_TRUE@   if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@   then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@   depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \
-@am__fastdepCC_TRUE@   if $(LTCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@   then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(LTCOMPILE) -c -o $@ $<
-
-ip6tables_multi-ip6tables-multi.o: ip6tables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-multi.o -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Tpo" -c -o ip6tables_multi-ip6tables-multi.o `test -f 'ip6tables-multi.c' || echo '$(srcdir)/'`ip6tables-multi.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-multi.c' object='ip6tables_multi-ip6tables-multi.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-multi.o `test -f 'ip6tables-multi.c' || echo '$(srcdir)/'`ip6tables-multi.c
-
-ip6tables_multi-ip6tables-multi.obj: ip6tables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-multi.obj -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Tpo" -c -o ip6tables_multi-ip6tables-multi.obj `if test -f 'ip6tables-multi.c'; then $(CYGPATH_W) 'ip6tables-multi.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-multi.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-multi.c' object='ip6tables_multi-ip6tables-multi.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-multi.obj `if test -f 'ip6tables-multi.c'; then $(CYGPATH_W) 'ip6tables-multi.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-multi.c'; fi`
-
-ip6tables_multi-ip6tables-save.o: ip6tables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-save.o -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-save.Tpo" -c -o ip6tables_multi-ip6tables-save.o `test -f 'ip6tables-save.c' || echo '$(srcdir)/'`ip6tables-save.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-save.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-save.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-save.c' object='ip6tables_multi-ip6tables-save.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-save.o `test -f 'ip6tables-save.c' || echo '$(srcdir)/'`ip6tables-save.c
-
-ip6tables_multi-ip6tables-save.obj: ip6tables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-save.obj -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-save.Tpo" -c -o ip6tables_multi-ip6tables-save.obj `if test -f 'ip6tables-save.c'; then $(CYGPATH_W) 'ip6tables-save.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-save.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-save.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-save.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-save.c' object='ip6tables_multi-ip6tables-save.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-save.obj `if test -f 'ip6tables-save.c'; then $(CYGPATH_W) 'ip6tables-save.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-save.c'; fi`
-
-ip6tables_multi-ip6tables-restore.o: ip6tables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-restore.o -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Tpo" -c -o ip6tables_multi-ip6tables-restore.o `test -f 'ip6tables-restore.c' || echo '$(srcdir)/'`ip6tables-restore.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-restore.c' object='ip6tables_multi-ip6tables-restore.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-restore.o `test -f 'ip6tables-restore.c' || echo '$(srcdir)/'`ip6tables-restore.c
-
-ip6tables_multi-ip6tables-restore.obj: ip6tables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-restore.obj -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Tpo" -c -o ip6tables_multi-ip6tables-restore.obj `if test -f 'ip6tables-restore.c'; then $(CYGPATH_W) 'ip6tables-restore.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-restore.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-restore.c' object='ip6tables_multi-ip6tables-restore.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-restore.obj `if test -f 'ip6tables-restore.c'; then $(CYGPATH_W) 'ip6tables-restore.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-restore.c'; fi`
-
-ip6tables_multi-ip6tables-standalone.o: ip6tables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-standalone.o -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Tpo" -c -o ip6tables_multi-ip6tables-standalone.o `test -f 'ip6tables-standalone.c' || echo '$(srcdir)/'`ip6tables-standalone.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-standalone.c' object='ip6tables_multi-ip6tables-standalone.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-standalone.o `test -f 'ip6tables-standalone.c' || echo '$(srcdir)/'`ip6tables-standalone.c
-
-ip6tables_multi-ip6tables-standalone.obj: ip6tables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables-standalone.obj -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Tpo" -c -o ip6tables_multi-ip6tables-standalone.obj `if test -f 'ip6tables-standalone.c'; then $(CYGPATH_W) 'ip6tables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-standalone.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-standalone.c' object='ip6tables_multi-ip6tables-standalone.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables-standalone.obj `if test -f 'ip6tables-standalone.c'; then $(CYGPATH_W) 'ip6tables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-standalone.c'; fi`
-
-ip6tables_multi-ip6tables.o: ip6tables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables.o -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables.Tpo" -c -o ip6tables_multi-ip6tables.o `test -f 'ip6tables.c' || echo '$(srcdir)/'`ip6tables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables.c' object='ip6tables_multi-ip6tables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables.o `test -f 'ip6tables.c' || echo '$(srcdir)/'`ip6tables.c
-
-ip6tables_multi-ip6tables.obj: ip6tables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-ip6tables.obj -MD -MP -MF "$(DEPDIR)/ip6tables_multi-ip6tables.Tpo" -c -o ip6tables_multi-ip6tables.obj `if test -f 'ip6tables.c'; then $(CYGPATH_W) 'ip6tables.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-ip6tables.Tpo" "$(DEPDIR)/ip6tables_multi-ip6tables.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-ip6tables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables.c' object='ip6tables_multi-ip6tables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-ip6tables.obj `if test -f 'ip6tables.c'; then $(CYGPATH_W) 'ip6tables.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables.c'; fi`
-
-ip6tables_multi-xtables.o: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-xtables.o -MD -MP -MF "$(DEPDIR)/ip6tables_multi-xtables.Tpo" -c -o ip6tables_multi-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-xtables.Tpo" "$(DEPDIR)/ip6tables_multi-xtables.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='ip6tables_multi-xtables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c
-
-ip6tables_multi-xtables.obj: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -MT ip6tables_multi-xtables.obj -MD -MP -MF "$(DEPDIR)/ip6tables_multi-xtables.Tpo" -c -o ip6tables_multi-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_multi-xtables.Tpo" "$(DEPDIR)/ip6tables_multi-xtables.Po"; else rm -f "$(DEPDIR)/ip6tables_multi-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='ip6tables_multi-xtables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_multi_CFLAGS) $(CFLAGS) -c -o ip6tables_multi-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`
-
-ip6tables_static-ip6tables-multi.o: ip6tables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-multi.o -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-multi.Tpo" -c -o ip6tables_static-ip6tables-multi.o `test -f 'ip6tables-multi.c' || echo '$(srcdir)/'`ip6tables-multi.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-multi.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-multi.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-multi.c' object='ip6tables_static-ip6tables-multi.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-multi.o `test -f 'ip6tables-multi.c' || echo '$(srcdir)/'`ip6tables-multi.c
-
-ip6tables_static-ip6tables-multi.obj: ip6tables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-multi.obj -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-multi.Tpo" -c -o ip6tables_static-ip6tables-multi.obj `if test -f 'ip6tables-multi.c'; then $(CYGPATH_W) 'ip6tables-multi.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-multi.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-multi.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-multi.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-multi.c' object='ip6tables_static-ip6tables-multi.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-multi.obj `if test -f 'ip6tables-multi.c'; then $(CYGPATH_W) 'ip6tables-multi.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-multi.c'; fi`
-
-ip6tables_static-ip6tables-save.o: ip6tables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-save.o -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-save.Tpo" -c -o ip6tables_static-ip6tables-save.o `test -f 'ip6tables-save.c' || echo '$(srcdir)/'`ip6tables-save.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-save.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-save.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-save.c' object='ip6tables_static-ip6tables-save.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-save.o `test -f 'ip6tables-save.c' || echo '$(srcdir)/'`ip6tables-save.c
-
-ip6tables_static-ip6tables-save.obj: ip6tables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-save.obj -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-save.Tpo" -c -o ip6tables_static-ip6tables-save.obj `if test -f 'ip6tables-save.c'; then $(CYGPATH_W) 'ip6tables-save.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-save.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-save.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-save.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-save.c' object='ip6tables_static-ip6tables-save.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-save.obj `if test -f 'ip6tables-save.c'; then $(CYGPATH_W) 'ip6tables-save.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-save.c'; fi`
-
-ip6tables_static-ip6tables-restore.o: ip6tables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-restore.o -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-restore.Tpo" -c -o ip6tables_static-ip6tables-restore.o `test -f 'ip6tables-restore.c' || echo '$(srcdir)/'`ip6tables-restore.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-restore.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-restore.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-restore.c' object='ip6tables_static-ip6tables-restore.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-restore.o `test -f 'ip6tables-restore.c' || echo '$(srcdir)/'`ip6tables-restore.c
-
-ip6tables_static-ip6tables-restore.obj: ip6tables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-restore.obj -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-restore.Tpo" -c -o ip6tables_static-ip6tables-restore.obj `if test -f 'ip6tables-restore.c'; then $(CYGPATH_W) 'ip6tables-restore.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-restore.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-restore.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-restore.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-restore.c' object='ip6tables_static-ip6tables-restore.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-restore.obj `if test -f 'ip6tables-restore.c'; then $(CYGPATH_W) 'ip6tables-restore.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-restore.c'; fi`
-
-ip6tables_static-ip6tables-standalone.o: ip6tables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-standalone.o -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Tpo" -c -o ip6tables_static-ip6tables-standalone.o `test -f 'ip6tables-standalone.c' || echo '$(srcdir)/'`ip6tables-standalone.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-standalone.c' object='ip6tables_static-ip6tables-standalone.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-standalone.o `test -f 'ip6tables-standalone.c' || echo '$(srcdir)/'`ip6tables-standalone.c
-
-ip6tables_static-ip6tables-standalone.obj: ip6tables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables-standalone.obj -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Tpo" -c -o ip6tables_static-ip6tables-standalone.obj `if test -f 'ip6tables-standalone.c'; then $(CYGPATH_W) 'ip6tables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-standalone.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables-standalone.c' object='ip6tables_static-ip6tables-standalone.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables-standalone.obj `if test -f 'ip6tables-standalone.c'; then $(CYGPATH_W) 'ip6tables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables-standalone.c'; fi`
-
-ip6tables_static-ip6tables.o: ip6tables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables.o -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables.Tpo" -c -o ip6tables_static-ip6tables.o `test -f 'ip6tables.c' || echo '$(srcdir)/'`ip6tables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables.c' object='ip6tables_static-ip6tables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables.o `test -f 'ip6tables.c' || echo '$(srcdir)/'`ip6tables.c
-
-ip6tables_static-ip6tables.obj: ip6tables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-ip6tables.obj -MD -MP -MF "$(DEPDIR)/ip6tables_static-ip6tables.Tpo" -c -o ip6tables_static-ip6tables.obj `if test -f 'ip6tables.c'; then $(CYGPATH_W) 'ip6tables.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-ip6tables.Tpo" "$(DEPDIR)/ip6tables_static-ip6tables.Po"; else rm -f "$(DEPDIR)/ip6tables_static-ip6tables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='ip6tables.c' object='ip6tables_static-ip6tables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-ip6tables.obj `if test -f 'ip6tables.c'; then $(CYGPATH_W) 'ip6tables.c'; else $(CYGPATH_W) '$(srcdir)/ip6tables.c'; fi`
-
-ip6tables_static-xtables.o: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-xtables.o -MD -MP -MF "$(DEPDIR)/ip6tables_static-xtables.Tpo" -c -o ip6tables_static-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-xtables.Tpo" "$(DEPDIR)/ip6tables_static-xtables.Po"; else rm -f "$(DEPDIR)/ip6tables_static-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='ip6tables_static-xtables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c
-
-ip6tables_static-xtables.obj: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -MT ip6tables_static-xtables.obj -MD -MP -MF "$(DEPDIR)/ip6tables_static-xtables.Tpo" -c -o ip6tables_static-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/ip6tables_static-xtables.Tpo" "$(DEPDIR)/ip6tables_static-xtables.Po"; else rm -f "$(DEPDIR)/ip6tables_static-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='ip6tables_static-xtables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ip6tables_static_CFLAGS) $(CFLAGS) -c -o ip6tables_static-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`
-
-iptables_multi-iptables-multi.o: iptables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-multi.o -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-multi.Tpo" -c -o iptables_multi-iptables-multi.o `test -f 'iptables-multi.c' || echo '$(srcdir)/'`iptables-multi.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-multi.Tpo" "$(DEPDIR)/iptables_multi-iptables-multi.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-multi.c' object='iptables_multi-iptables-multi.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-multi.o `test -f 'iptables-multi.c' || echo '$(srcdir)/'`iptables-multi.c
-
-iptables_multi-iptables-multi.obj: iptables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-multi.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-multi.Tpo" -c -o iptables_multi-iptables-multi.obj `if test -f 'iptables-multi.c'; then $(CYGPATH_W) 'iptables-multi.c'; else $(CYGPATH_W) '$(srcdir)/iptables-multi.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-multi.Tpo" "$(DEPDIR)/iptables_multi-iptables-multi.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-multi.c' object='iptables_multi-iptables-multi.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-multi.obj `if test -f 'iptables-multi.c'; then $(CYGPATH_W) 'iptables-multi.c'; else $(CYGPATH_W) '$(srcdir)/iptables-multi.c'; fi`
-
-iptables_multi-iptables-save.o: iptables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-save.o -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-save.Tpo" -c -o iptables_multi-iptables-save.o `test -f 'iptables-save.c' || echo '$(srcdir)/'`iptables-save.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-save.Tpo" "$(DEPDIR)/iptables_multi-iptables-save.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-save.c' object='iptables_multi-iptables-save.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-save.o `test -f 'iptables-save.c' || echo '$(srcdir)/'`iptables-save.c
-
-iptables_multi-iptables-save.obj: iptables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-save.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-save.Tpo" -c -o iptables_multi-iptables-save.obj `if test -f 'iptables-save.c'; then $(CYGPATH_W) 'iptables-save.c'; else $(CYGPATH_W) '$(srcdir)/iptables-save.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-save.Tpo" "$(DEPDIR)/iptables_multi-iptables-save.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-save.c' object='iptables_multi-iptables-save.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-save.obj `if test -f 'iptables-save.c'; then $(CYGPATH_W) 'iptables-save.c'; else $(CYGPATH_W) '$(srcdir)/iptables-save.c'; fi`
-
-iptables_multi-iptables-restore.o: iptables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-restore.o -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-restore.Tpo" -c -o iptables_multi-iptables-restore.o `test -f 'iptables-restore.c' || echo '$(srcdir)/'`iptables-restore.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-restore.Tpo" "$(DEPDIR)/iptables_multi-iptables-restore.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-restore.c' object='iptables_multi-iptables-restore.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-restore.o `test -f 'iptables-restore.c' || echo '$(srcdir)/'`iptables-restore.c
-
-iptables_multi-iptables-restore.obj: iptables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-restore.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-restore.Tpo" -c -o iptables_multi-iptables-restore.obj `if test -f 'iptables-restore.c'; then $(CYGPATH_W) 'iptables-restore.c'; else $(CYGPATH_W) '$(srcdir)/iptables-restore.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-restore.Tpo" "$(DEPDIR)/iptables_multi-iptables-restore.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-restore.c' object='iptables_multi-iptables-restore.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-restore.obj `if test -f 'iptables-restore.c'; then $(CYGPATH_W) 'iptables-restore.c'; else $(CYGPATH_W) '$(srcdir)/iptables-restore.c'; fi`
-
-iptables_multi-iptables-xml.o: iptables-xml.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-xml.o -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-xml.Tpo" -c -o iptables_multi-iptables-xml.o `test -f 'iptables-xml.c' || echo '$(srcdir)/'`iptables-xml.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-xml.Tpo" "$(DEPDIR)/iptables_multi-iptables-xml.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-xml.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-xml.c' object='iptables_multi-iptables-xml.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-xml.o `test -f 'iptables-xml.c' || echo '$(srcdir)/'`iptables-xml.c
-
-iptables_multi-iptables-xml.obj: iptables-xml.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-xml.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-xml.Tpo" -c -o iptables_multi-iptables-xml.obj `if test -f 'iptables-xml.c'; then $(CYGPATH_W) 'iptables-xml.c'; else $(CYGPATH_W) '$(srcdir)/iptables-xml.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-xml.Tpo" "$(DEPDIR)/iptables_multi-iptables-xml.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-xml.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-xml.c' object='iptables_multi-iptables-xml.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-xml.obj `if test -f 'iptables-xml.c'; then $(CYGPATH_W) 'iptables-xml.c'; else $(CYGPATH_W) '$(srcdir)/iptables-xml.c'; fi`
-
-iptables_multi-iptables-standalone.o: iptables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-standalone.o -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-standalone.Tpo" -c -o iptables_multi-iptables-standalone.o `test -f 'iptables-standalone.c' || echo '$(srcdir)/'`iptables-standalone.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-standalone.Tpo" "$(DEPDIR)/iptables_multi-iptables-standalone.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-standalone.c' object='iptables_multi-iptables-standalone.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-standalone.o `test -f 'iptables-standalone.c' || echo '$(srcdir)/'`iptables-standalone.c
-
-iptables_multi-iptables-standalone.obj: iptables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables-standalone.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables-standalone.Tpo" -c -o iptables_multi-iptables-standalone.obj `if test -f 'iptables-standalone.c'; then $(CYGPATH_W) 'iptables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/iptables-standalone.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables-standalone.Tpo" "$(DEPDIR)/iptables_multi-iptables-standalone.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-standalone.c' object='iptables_multi-iptables-standalone.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables-standalone.obj `if test -f 'iptables-standalone.c'; then $(CYGPATH_W) 'iptables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/iptables-standalone.c'; fi`
-
-iptables_multi-iptables.o: iptables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables.o -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables.Tpo" -c -o iptables_multi-iptables.o `test -f 'iptables.c' || echo '$(srcdir)/'`iptables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables.Tpo" "$(DEPDIR)/iptables_multi-iptables.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables.c' object='iptables_multi-iptables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables.o `test -f 'iptables.c' || echo '$(srcdir)/'`iptables.c
-
-iptables_multi-iptables.obj: iptables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-iptables.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-iptables.Tpo" -c -o iptables_multi-iptables.obj `if test -f 'iptables.c'; then $(CYGPATH_W) 'iptables.c'; else $(CYGPATH_W) '$(srcdir)/iptables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-iptables.Tpo" "$(DEPDIR)/iptables_multi-iptables.Po"; else rm -f "$(DEPDIR)/iptables_multi-iptables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables.c' object='iptables_multi-iptables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-iptables.obj `if test -f 'iptables.c'; then $(CYGPATH_W) 'iptables.c'; else $(CYGPATH_W) '$(srcdir)/iptables.c'; fi`
-
-iptables_multi-xtables.o: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-xtables.o -MD -MP -MF "$(DEPDIR)/iptables_multi-xtables.Tpo" -c -o iptables_multi-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-xtables.Tpo" "$(DEPDIR)/iptables_multi-xtables.Po"; else rm -f "$(DEPDIR)/iptables_multi-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='iptables_multi-xtables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c
-
-iptables_multi-xtables.obj: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -MT iptables_multi-xtables.obj -MD -MP -MF "$(DEPDIR)/iptables_multi-xtables.Tpo" -c -o iptables_multi-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_multi-xtables.Tpo" "$(DEPDIR)/iptables_multi-xtables.Po"; else rm -f "$(DEPDIR)/iptables_multi-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='iptables_multi-xtables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_multi_CFLAGS) $(CFLAGS) -c -o iptables_multi-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`
-
-iptables_static-iptables-multi.o: iptables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-multi.o -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-multi.Tpo" -c -o iptables_static-iptables-multi.o `test -f 'iptables-multi.c' || echo '$(srcdir)/'`iptables-multi.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-multi.Tpo" "$(DEPDIR)/iptables_static-iptables-multi.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-multi.c' object='iptables_static-iptables-multi.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-multi.o `test -f 'iptables-multi.c' || echo '$(srcdir)/'`iptables-multi.c
-
-iptables_static-iptables-multi.obj: iptables-multi.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-multi.obj -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-multi.Tpo" -c -o iptables_static-iptables-multi.obj `if test -f 'iptables-multi.c'; then $(CYGPATH_W) 'iptables-multi.c'; else $(CYGPATH_W) '$(srcdir)/iptables-multi.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-multi.Tpo" "$(DEPDIR)/iptables_static-iptables-multi.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-multi.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-multi.c' object='iptables_static-iptables-multi.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-multi.obj `if test -f 'iptables-multi.c'; then $(CYGPATH_W) 'iptables-multi.c'; else $(CYGPATH_W) '$(srcdir)/iptables-multi.c'; fi`
-
-iptables_static-iptables-save.o: iptables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-save.o -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-save.Tpo" -c -o iptables_static-iptables-save.o `test -f 'iptables-save.c' || echo '$(srcdir)/'`iptables-save.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-save.Tpo" "$(DEPDIR)/iptables_static-iptables-save.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-save.c' object='iptables_static-iptables-save.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-save.o `test -f 'iptables-save.c' || echo '$(srcdir)/'`iptables-save.c
-
-iptables_static-iptables-save.obj: iptables-save.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-save.obj -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-save.Tpo" -c -o iptables_static-iptables-save.obj `if test -f 'iptables-save.c'; then $(CYGPATH_W) 'iptables-save.c'; else $(CYGPATH_W) '$(srcdir)/iptables-save.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-save.Tpo" "$(DEPDIR)/iptables_static-iptables-save.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-save.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-save.c' object='iptables_static-iptables-save.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-save.obj `if test -f 'iptables-save.c'; then $(CYGPATH_W) 'iptables-save.c'; else $(CYGPATH_W) '$(srcdir)/iptables-save.c'; fi`
-
-iptables_static-iptables-restore.o: iptables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-restore.o -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-restore.Tpo" -c -o iptables_static-iptables-restore.o `test -f 'iptables-restore.c' || echo '$(srcdir)/'`iptables-restore.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-restore.Tpo" "$(DEPDIR)/iptables_static-iptables-restore.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-restore.c' object='iptables_static-iptables-restore.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-restore.o `test -f 'iptables-restore.c' || echo '$(srcdir)/'`iptables-restore.c
-
-iptables_static-iptables-restore.obj: iptables-restore.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-restore.obj -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-restore.Tpo" -c -o iptables_static-iptables-restore.obj `if test -f 'iptables-restore.c'; then $(CYGPATH_W) 'iptables-restore.c'; else $(CYGPATH_W) '$(srcdir)/iptables-restore.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-restore.Tpo" "$(DEPDIR)/iptables_static-iptables-restore.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-restore.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-restore.c' object='iptables_static-iptables-restore.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-restore.obj `if test -f 'iptables-restore.c'; then $(CYGPATH_W) 'iptables-restore.c'; else $(CYGPATH_W) '$(srcdir)/iptables-restore.c'; fi`
-
-iptables_static-iptables-xml.o: iptables-xml.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-xml.o -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-xml.Tpo" -c -o iptables_static-iptables-xml.o `test -f 'iptables-xml.c' || echo '$(srcdir)/'`iptables-xml.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-xml.Tpo" "$(DEPDIR)/iptables_static-iptables-xml.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-xml.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-xml.c' object='iptables_static-iptables-xml.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-xml.o `test -f 'iptables-xml.c' || echo '$(srcdir)/'`iptables-xml.c
-
-iptables_static-iptables-xml.obj: iptables-xml.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-xml.obj -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-xml.Tpo" -c -o iptables_static-iptables-xml.obj `if test -f 'iptables-xml.c'; then $(CYGPATH_W) 'iptables-xml.c'; else $(CYGPATH_W) '$(srcdir)/iptables-xml.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-xml.Tpo" "$(DEPDIR)/iptables_static-iptables-xml.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-xml.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-xml.c' object='iptables_static-iptables-xml.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-xml.obj `if test -f 'iptables-xml.c'; then $(CYGPATH_W) 'iptables-xml.c'; else $(CYGPATH_W) '$(srcdir)/iptables-xml.c'; fi`
-
-iptables_static-iptables-standalone.o: iptables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-standalone.o -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-standalone.Tpo" -c -o iptables_static-iptables-standalone.o `test -f 'iptables-standalone.c' || echo '$(srcdir)/'`iptables-standalone.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-standalone.Tpo" "$(DEPDIR)/iptables_static-iptables-standalone.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-standalone.c' object='iptables_static-iptables-standalone.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-standalone.o `test -f 'iptables-standalone.c' || echo '$(srcdir)/'`iptables-standalone.c
-
-iptables_static-iptables-standalone.obj: iptables-standalone.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables-standalone.obj -MD -MP -MF "$(DEPDIR)/iptables_static-iptables-standalone.Tpo" -c -o iptables_static-iptables-standalone.obj `if test -f 'iptables-standalone.c'; then $(CYGPATH_W) 'iptables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/iptables-standalone.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables-standalone.Tpo" "$(DEPDIR)/iptables_static-iptables-standalone.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables-standalone.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables-standalone.c' object='iptables_static-iptables-standalone.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables-standalone.obj `if test -f 'iptables-standalone.c'; then $(CYGPATH_W) 'iptables-standalone.c'; else $(CYGPATH_W) '$(srcdir)/iptables-standalone.c'; fi`
-
-iptables_static-iptables.o: iptables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables.o -MD -MP -MF "$(DEPDIR)/iptables_static-iptables.Tpo" -c -o iptables_static-iptables.o `test -f 'iptables.c' || echo '$(srcdir)/'`iptables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables.Tpo" "$(DEPDIR)/iptables_static-iptables.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables.c' object='iptables_static-iptables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables.o `test -f 'iptables.c' || echo '$(srcdir)/'`iptables.c
-
-iptables_static-iptables.obj: iptables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-iptables.obj -MD -MP -MF "$(DEPDIR)/iptables_static-iptables.Tpo" -c -o iptables_static-iptables.obj `if test -f 'iptables.c'; then $(CYGPATH_W) 'iptables.c'; else $(CYGPATH_W) '$(srcdir)/iptables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-iptables.Tpo" "$(DEPDIR)/iptables_static-iptables.Po"; else rm -f "$(DEPDIR)/iptables_static-iptables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='iptables.c' object='iptables_static-iptables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-iptables.obj `if test -f 'iptables.c'; then $(CYGPATH_W) 'iptables.c'; else $(CYGPATH_W) '$(srcdir)/iptables.c'; fi`
-
-iptables_static-xtables.o: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-xtables.o -MD -MP -MF "$(DEPDIR)/iptables_static-xtables.Tpo" -c -o iptables_static-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-xtables.Tpo" "$(DEPDIR)/iptables_static-xtables.Po"; else rm -f "$(DEPDIR)/iptables_static-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='iptables_static-xtables.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-xtables.o `test -f 'xtables.c' || echo '$(srcdir)/'`xtables.c
-
-iptables_static-xtables.obj: xtables.c
-@am__fastdepCC_TRUE@   if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -MT iptables_static-xtables.obj -MD -MP -MF "$(DEPDIR)/iptables_static-xtables.Tpo" -c -o iptables_static-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`; \
-@am__fastdepCC_TRUE@   then mv -f "$(DEPDIR)/iptables_static-xtables.Tpo" "$(DEPDIR)/iptables_static-xtables.Po"; else rm -f "$(DEPDIR)/iptables_static-xtables.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='xtables.c' object='iptables_static-xtables.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iptables_static_CFLAGS) $(CFLAGS) -c -o iptables_static-xtables.obj `if test -f 'xtables.c'; then $(CYGPATH_W) 'xtables.c'; else $(CYGPATH_W) '$(srcdir)/xtables.c'; fi`
-
-mostlyclean-libtool:
-       -rm -f *.lo
-
-clean-libtool:
-       -rm -rf .libs _libs
-
-distclean-libtool:
-       -rm -f libtool
-uninstall-info-am:
-install-man8: $(man8_MANS) $(man_MANS)
-       @$(NORMAL_INSTALL)
-       test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
-       @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
-       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-       for i in $$l2; do \
-         case "$$i" in \
-           *.8*) list="$$list $$i" ;; \
-         esac; \
-       done; \
-       for i in $$list; do \
-         if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-         else file=$$i; fi; \
-         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-         case "$$ext" in \
-           8*) ;; \
-           *) ext='8' ;; \
-         esac; \
-         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-         inst=`echo $$inst | sed -e 's/^.*\///'`; \
-         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
-         $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
-       done
-uninstall-man8:
-       @$(NORMAL_UNINSTALL)
-       @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
-       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-       for i in $$l2; do \
-         case "$$i" in \
-           *.8*) list="$$list $$i" ;; \
-         esac; \
-       done; \
-       for i in $$list; do \
-         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-         case "$$ext" in \
-           8*) ;; \
-           *) ext='8' ;; \
-         esac; \
-         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-         inst=`echo $$inst | sed -e 's/^.*\///'`; \
-         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
-         rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
-       done
-install-includeHEADERS: $(include_HEADERS)
-       @$(NORMAL_INSTALL)
-       test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
-       @list='$(include_HEADERS)'; for p in $$list; do \
-         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-         f=$(am__strip_dir) \
-         echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
-         $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
-       done
-
-uninstall-includeHEADERS:
-       @$(NORMAL_UNINSTALL)
-       @list='$(include_HEADERS)'; for p in $$list; do \
-         f=$(am__strip_dir) \
-         echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
-         rm -f "$(DESTDIR)$(includedir)/$$f"; \
-       done
-install-iptcHEADERS: $(iptc_HEADERS)
-       @$(NORMAL_INSTALL)
-       test -z "$(iptcdir)" || $(mkdir_p) "$(DESTDIR)$(iptcdir)"
-       @list='$(iptc_HEADERS)'; for p in $$list; do \
-         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-         f=$(am__strip_dir) \
-         echo " $(iptcHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(iptcdir)/$$f'"; \
-         $(iptcHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(iptcdir)/$$f"; \
-       done
-
-uninstall-iptcHEADERS:
-       @$(NORMAL_UNINSTALL)
-       @list='$(iptc_HEADERS)'; for p in $$list; do \
-         f=$(am__strip_dir) \
-         echo " rm -f '$(DESTDIR)$(iptcdir)/$$f'"; \
-         rm -f "$(DESTDIR)$(iptcdir)/$$f"; \
-       done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-       @failcom='exit 1'; \
-       for f in x $$MAKEFLAGS; do \
-         case $$f in \
-           *=* | --[!k]*);; \
-           *k*) failcom='fail=yes';; \
-         esac; \
-       done; \
-       dot_seen=no; \
-       target=`echo $@ | sed s/-recursive//`; \
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         echo "Making $$target in $$subdir"; \
-         if test "$$subdir" = "."; then \
-           dot_seen=yes; \
-           local_target="$$target-am"; \
-         else \
-           local_target="$$target"; \
-         fi; \
-         (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-         || eval $$failcom; \
-       done; \
-       if test "$$dot_seen" = "no"; then \
-         $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-       fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-       @failcom='exit 1'; \
-       for f in x $$MAKEFLAGS; do \
-         case $$f in \
-           *=* | --[!k]*);; \
-           *k*) failcom='fail=yes';; \
-         esac; \
-       done; \
-       dot_seen=no; \
-       case "$@" in \
-         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-         *) list='$(SUBDIRS)' ;; \
-       esac; \
-       rev=''; for subdir in $$list; do \
-         if test "$$subdir" = "."; then :; else \
-           rev="$$subdir $$rev"; \
-         fi; \
-       done; \
-       rev="$$rev ."; \
-       target=`echo $@ | sed s/-recursive//`; \
-       for subdir in $$rev; do \
-         echo "Making $$target in $$subdir"; \
-         if test "$$subdir" = "."; then \
-           local_target="$$target-am"; \
-         else \
-           local_target="$$target"; \
-         fi; \
-         (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-         || eval $$failcom; \
-       done && test -z "$$fail"
-tags-recursive:
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-       done
-ctags-recursive:
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-       done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-       list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '    { files[$$0] = 1; } \
-              END { for (i in files) print i; }'`; \
-       mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       tags=; \
-       here=`pwd`; \
-       if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-         include_option=--etags-include; \
-         empty_fix=.; \
-       else \
-         include_option=--include; \
-         empty_fix=; \
-       fi; \
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         if test "$$subdir" = .; then :; else \
-           test ! -f $$subdir/TAGS || \
-             tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-         fi; \
-       done; \
-       list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '    { files[$$0] = 1; } \
-              END { for (i in files) print i; }'`; \
-       if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-         test -n "$$unique" || unique=$$empty_fix; \
-         $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-           $$tags $$unique; \
-       fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       tags=; \
-       here=`pwd`; \
-       list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '    { files[$$0] = 1; } \
-              END { for (i in files) print i; }'`; \
-       test -z "$(CTAGS_ARGS)$$tags$$unique" \
-         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-            $$tags $$unique
-
-GTAGS:
-       here=`$(am__cd) $(top_builddir) && pwd` \
-         && cd $(top_srcdir) \
-         && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-       $(am__remove_distdir)
-       mkdir $(distdir)
-       $(mkdir_p) $(distdir)/extensions $(distdir)/include $(distdir)/include/libiptc
-       @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-       list='$(DISTFILES)'; for file in $$list; do \
-         case $$file in \
-           $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-           $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-         esac; \
-         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-         dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-         if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-           dir="/$$dir"; \
-           $(mkdir_p) "$(distdir)$$dir"; \
-         else \
-           dir=''; \
-         fi; \
-         if test -d $$d/$$file; then \
-           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-             cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-           fi; \
-           cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-         else \
-           test -f $(distdir)/$$file \
-           || cp -p $$d/$$file $(distdir)/$$file \
-           || exit 1; \
-         fi; \
-       done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-         if test "$$subdir" = .; then :; else \
-           test -d "$(distdir)/$$subdir" \
-           || $(mkdir_p) "$(distdir)/$$subdir" \
-           || exit 1; \
-           distdir=`$(am__cd) $(distdir) && pwd`; \
-           top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-           (cd $$subdir && \
-             $(MAKE) $(AM_MAKEFLAGS) \
-               top_distdir="$$top_distdir" \
-               distdir="$$distdir/$$subdir" \
-               distdir) \
-             || exit 1; \
-         fi; \
-       done
-       -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-         ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-         ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-         ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-       || chmod -R a+r $(distdir)
-dist-gzip: distdir
-       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-       $(am__remove_distdir)
-
-dist-bzip2: distdir
-       tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-       $(am__remove_distdir)
-
-dist-tarZ: distdir
-       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-       $(am__remove_distdir)
-
-dist-shar: distdir
-       shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-       $(am__remove_distdir)
-
-dist-zip: distdir
-       -rm -f $(distdir).zip
-       zip -rq $(distdir).zip $(distdir)
-       $(am__remove_distdir)
-
-dist dist-all: distdir
-       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-       $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-       case '$(DIST_ARCHIVES)' in \
-       *.tar.gz*) \
-         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
-       *.tar.bz2*) \
-         bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-       *.tar.Z*) \
-         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-       *.shar.gz*) \
-         GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-       *.zip*) \
-         unzip $(distdir).zip ;;\
-       esac
-       chmod -R a-w $(distdir); chmod a+w $(distdir)
-       mkdir $(distdir)/_build
-       mkdir $(distdir)/_inst
-       chmod a-w $(distdir)
-       dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-         && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-         && cd $(distdir)/_build \
-         && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-           $(DISTCHECK_CONFIGURE_FLAGS) \
-         && $(MAKE) $(AM_MAKEFLAGS) \
-         && $(MAKE) $(AM_MAKEFLAGS) dvi \
-         && $(MAKE) $(AM_MAKEFLAGS) check \
-         && $(MAKE) $(AM_MAKEFLAGS) install \
-         && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-         && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-         && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-               distuninstallcheck \
-         && chmod -R a-w "$$dc_install_base" \
-         && ({ \
-              (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-                   distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-             } || { rm -rf "$$dc_destdir"; exit 1; }) \
-         && rm -rf "$$dc_destdir" \
-         && $(MAKE) $(AM_MAKEFLAGS) dist \
-         && rm -rf $(DIST_ARCHIVES) \
-         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-       $(am__remove_distdir)
-       @(echo "$(distdir) archives ready for distribution: "; \
-         list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-         sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-       @cd $(distuninstallcheck_dir) \
-       && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-          || { echo "ERROR: files left after uninstall:" ; \
-               if test -n "$(DESTDIR)"; then \
-                 echo "  (check DESTDIR support)"; \
-               fi ; \
-               $(distuninstallcheck_listfiles) ; \
-               exit 1; } >&2
-distcleancheck: distclean
-       @if test '$(srcdir)' = . ; then \
-         echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-         exit 1 ; \
-       fi
-       @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-         || { echo "ERROR: files left in build directory after distclean:" ; \
-              $(distcleancheck_listfiles) ; \
-              exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) config.h
-installdirs: installdirs-recursive
-installdirs-am:
-       for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(iptcdir)"; do \
-         test -z "$$dir" || $(mkdir_p) "$$dir"; \
-       done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-         `test -z '$(STRIP)' || \
-           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-       -rm -f libiptc/$(DEPDIR)/$(am__dirstamp)
-       -rm -f libiptc/$(am__dirstamp)
-
-maintainer-clean-generic:
-       @echo "This command is intended for maintainers to use"
-       @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool \
-       clean-noinstLIBRARIES clean-noinstPROGRAMS clean-sbinPROGRAMS \
-       mostlyclean-am
-
-distclean: distclean-recursive
-       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-       -rm -rf ./$(DEPDIR) libiptc/$(DEPDIR)
-       -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-       distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-includeHEADERS install-iptcHEADERS \
-       install-man
-
-install-exec-am: install-binPROGRAMS install-sbinPROGRAMS
-
-install-info: install-info-recursive
-
-install-man: install-man8
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-       -rm -rf $(top_srcdir)/autom4te.cache
-       -rm -rf ./$(DEPDIR) libiptc/$(DEPDIR)
-       -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-       mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
-       uninstall-info-am uninstall-iptcHEADERS uninstall-man \
-       uninstall-sbinPROGRAMS
-
-uninstall-info: uninstall-info-recursive
-
-uninstall-man: uninstall-man8
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-       check-am clean clean-binPROGRAMS clean-generic clean-libtool \
-       clean-noinstLIBRARIES clean-noinstPROGRAMS clean-recursive \
-       clean-sbinPROGRAMS ctags ctags-recursive dist dist-all \
-       dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip distcheck \
-       distclean distclean-compile distclean-generic distclean-hdr \
-       distclean-libtool distclean-recursive distclean-tags \
-       distcleancheck distdir distuninstallcheck dvi dvi-am html \
-       html-am info info-am install install-am install-binPROGRAMS \
-       install-data install-data-am install-exec install-exec-am \
-       install-includeHEADERS install-info install-info-am \
-       install-iptcHEADERS install-man install-man8 \
-       install-sbinPROGRAMS install-strip installcheck \
-       installcheck-am installdirs installdirs-am maintainer-clean \
-       maintainer-clean-generic maintainer-clean-recursive \
-       mostlyclean mostlyclean-compile mostlyclean-generic \
-       mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-       tags tags-recursive uninstall uninstall-am \
-       uninstall-binPROGRAMS uninstall-includeHEADERS \
-       uninstall-info-am uninstall-iptcHEADERS uninstall-man \
-       uninstall-man8 uninstall-sbinPROGRAMS
-
-
-iptables.8: ${srcdir}/iptables.8.in extensions/matches4.man extensions/targets4.man
-       ${AM_VERBOSE_GEN} sed -e '/@MATCH@/ r extensions/matches4.man' -e '/@TARGET@/ r extensions/targets4.man' $< >$@;
-
-ip6tables.8: ${srcdir}/ip6tables.8.in extensions/matches6.man extensions/targets6.man
-       ${AM_VERBOSE_GEN} sed -e '/@MATCH@/ r extensions/matches6.man' -e '/@TARGET@/ r extensions/targets6.man' $< >$@;
-
-extensions/%:
-       ${MAKE} ${AM_MAKEFLAGS} -C $(@D) $(@F)
-
-.PHONY: tarball
-tarball:
-       rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION};
-       pushd ${top_srcdir} && git-archive --prefix=${PACKAGE_TARNAME}-${PACKAGE_VERSION}/ HEAD | tar -C /tmp -x && popd;
-       pushd /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION} && ./autogen.sh && popd;
-       tar -C /tmp -cjf ${PACKAGE_TARNAME}-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ${PACKAGE_TARNAME}-${PACKAGE_VERSION}/;
-       rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION};
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644 (file)
index f136e80..0000000
+++ /dev/null
@@ -1,7530 +0,0 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 52 Debian 1.5.26-4 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-                [m4_ifdef([AC_PROVIDE_$1],
-                          [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-       [AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-            [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-            [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-            [define([LT_AC_PROG_GCJ],
-               defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-_LT_REQUIRED_DARWIN_CHECKS
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-       [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-       [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# --------------------------
-# Check for some things on darwin
-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
-      fi])
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-   [lt_cv_ld_exported_symbols_list=yes],
-   [lt_cv_ld_exported_symbols_list=no])
-   LDFLAGS="$save_LDFLAGS"
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[0123]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[[012]]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-       /^0/ {
-           s/^0  *\(.*\)$/\1/
-           p
-       }
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-            [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-        [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-[$]*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-        test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-        echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-        test "X$echo_testing_string" = "X$echo_test_string"; then
-       # Cool, printf works
-       :
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-          test "X$echo_testing_string" = 'X\t' &&
-          echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-       CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-       export CONFIG_SHELL
-       SHELL="$CONFIG_SHELL"
-       export SHELL
-       echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-          test "X$echo_testing_string" = 'X\t' &&
-          echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-       echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-       # maybe with a smaller string...
-       prev=:
-
-       for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-         if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-         then
-           break
-         fi
-         prev="$cmd"
-       done
-
-       if test "$prev" != 'sed 50q "[$]0"'; then
-         echo_test_string=`eval $prev`
-         export echo_test_string
-         exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-       else
-         # Oops.  We lost completely, so just stick with echo.
-         echo=echo
-       fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-       [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-         LD="${LD-ld} -64"
-       fi
-       ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#              [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
-else
-    ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
-else
-    ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536      # usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[       ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-              = "XX$teststring") >/dev/null 2>&1 &&
-             new_result=`expr "X$teststring" : ".*" 2>&1` &&
-             lt_cv_sys_max_cmd_len=$new_result &&
-             test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL          RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL                DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL                0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW           RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW         DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW       RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW     DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW     0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-         [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-           [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-       [AC_CHECK_FUNC([dlopen],
-             [lt_cv_dlopen="dlopen"],
-         [AC_CHECK_LIB([dl], [dlopen],
-               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-           [AC_CHECK_LIB([svld], [dlopen],
-                 [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-             [AC_CHECK_LIB([dld], [dld_link],
-                   [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-             ])
-           ])
-         ])
-       ])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-         lt_cv_dlopen_self, [dnl
-         _LT_AC_TRY_DLOPEN_SELF(
-           lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-           lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-         lt_cv_dlopen_self_static, [dnl
-         _LT_AC_TRY_DLOPEN_SELF(
-           lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-           lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-          echo ' yes '
-          echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-       :
-      else
-       can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-       if test "$lt_cv_prog_gnu_ld" = yes; then
-               version_type=linux
-       else
-               version_type=irix
-       fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[         ]*hwcap[        ]/d;s/[:,       ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-       shlibpath_overrides_runpath=no
-       ;;
-      *)
-       shlibpath_overrides_runpath=yes
-       ;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-       ;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-       ;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-       if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-           ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-           (test "X$CXX" != "Xg++"))) ; then
-         AC_LIBTOOL_LANG_CXX_CONFIG
-       else
-         tagname=""
-       fi
-       ;;
-
-      F77)
-       if test -n "$F77" && test "X$F77" != "Xno"; then
-         AC_LIBTOOL_LANG_F77_CONFIG
-       else
-         tagname=""
-       fi
-       ;;
-
-      GCJ)
-       if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-         AC_LIBTOOL_LANG_GCJ_CONFIG
-       else
-         tagname=""
-       fi
-       ;;
-
-      RC)
-       AC_LIBTOOL_LANG_RC_CONFIG
-       ;;
-
-      *)
-       AC_MSG_ERROR([Unsupported tag name: $tagname])
-       ;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-       [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_shared=yes
-       fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-       [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_static=yes
-       fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_fast_install=yes
-       fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-       case $deplibs_check_method in
-       "file_magic "*)
-         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-           $EGREP "$file_magic_regex" > /dev/null; then
-           :
-         else
-           cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-         fi ;;
-       esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-       [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-       ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-       test "$with_gnu_ld" != no && break
-       ;;
-      *)
-       test "$with_gnu_ld" != yes && break
-       ;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd* | netbsdelf*-gnu)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-        [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-          [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  AC_PROG_LD
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-       grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix[[4-9]]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-       for ld_flag in $LDFLAGS; do
-         case $ld_flag in
-         *-brtl*)
-           aix_use_runtimelinking=yes
-           break
-           ;;
-         esac
-       done
-       ;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-       collect2name=`${CC} -print-prog-name=collect2`
-       if test -f "$collect2name" && \
-          strings "$collect2name" | grep resolve_lib_name >/dev/null
-       then
-         # We have reworked collect2
-         :
-       else
-         # We have old collect2
-         _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-         # It fails to find uninstalled libraries when the uninstalled
-         # path is not listed in the libpath.  Setting hardcode_minus_L
-         # to unsupported forces relinking
-         _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-       fi
-       ;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-       shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-       # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-       # chokes on -Wl,-G. The following line is correct:
-       shared_flag='-G'
-      else
-       if test "$aix_use_runtimelinking" = yes; then
-         shared_flag='${wl}-G'
-       else
-         shared_flag='${wl}-bM:SRE'
-       fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-       _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-       # Warning - without using the other run time loading flags,
-       # -berok will link without error, but may produce a broken library.
-       _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-       # Exported symbols can be pulled into shared objects from archives
-       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-       _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-       # This is similar to how AIX traditionally builds its shared libraries.
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-       cp $export_symbols $output_objdir/$soname.def;
-      else
-       echo EXPORTS > $output_objdir/$soname.def;
-       cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      ghcx*)
-       # Green Hills C++ Compiler
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      *)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-                               # but as the default
-                               # location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-      case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-                                             # but as the default
-                                             # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      aCC*)
-       case $host_cpu in
-       hppa*64*)
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-         ;;
-       ia64*)
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-         ;;
-       *)
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-         ;;
-       esac
-       # Commands to make compiler produce verbose output that lists
-       # what "hidden" libraries, object files and flags are used when
-       # linking a shared library.
-       #
-       # There doesn't appear to be a way to prevent this compiler from
-       # explicitly linking system object files so we need to strip them
-       # from the output so that they don't get included in the library
-       # dependencies.
-       output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-       ;;
-      *)
-       if test "$GXX" = yes; then
-         if test $with_gnu_ld = no; then
-           case $host_cpu in
-           hppa*64*)
-             _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-             ;;
-           ia64*)
-             _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-             ;;
-           *)
-             _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-             ;;
-           esac
-         fi
-       else
-         # FIXME: insert proper C++ library support
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
-    esac
-    ;;
-  interix[[3-9]]*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-       # SGI C++
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-       # Archives containing C++ object files must be created using
-       # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-       # necessary to make sure instantiated templates are included
-       # in the archive.
-       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-       ;;
-      *)
-       if test "$GXX" = yes; then
-         if test "$with_gnu_ld" = no; then
-           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-         else
-           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-         fi
-       fi
-       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-       ;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-       # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-       # KCC will only create a shared library if the output file
-       # ends with ".so" (or ".sl" for HP-UX), so rename the library
-       # to its proper name (with version) after linking.
-       _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-       # Commands to make compiler produce verbose output that lists
-       # what "hidden" libraries, object files and flags are used when
-       # linking a shared library.
-       #
-       # There doesn't appear to be a way to prevent this compiler from
-       # explicitly linking system object files so we need to strip them
-       # from the output so that they don't get included in the library
-       # dependencies.
-       output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-       # Archives containing C++ object files must be created using
-       # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-       ;;
-      icpc*)
-       # Intel C++
-       with_gnu_ld=yes
-       # version 8.0 and above of icpc choke on multiply defined symbols
-       # if we add $predep_objects and $postdep_objects, however 7.1 and
-       # earlier do not add the objects themselves.
-       case `$CC -V 2>&1` in
-       *"Version 7."*)
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-         ;;
-       *)  # Version 8.0 or newer
-         tmp_idyn=
-         case $host_cpu in
-           ia64*) tmp_idyn=' -i_dynamic';;
-         esac
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-         ;;
-       esac
-       _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-       ;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-       # Compaq C++
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-       runpath_var=LD_RUN_PATH
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-       # Commands to make compiler produce verbose output that lists
-       # what "hidden" libraries, object files and flags are used when
-       # linking a shared library.
-       #
-       # There doesn't appear to be a way to prevent this compiler from
-       # explicitly linking system object files so we need to strip them
-       # from the output so that they don't get included in the library
-       # dependencies.
-       output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-       ;;
-      *)
-       case `$CC -V 2>&1 | sed 5q` in
-       *Sun\ C*)
-         # Sun C++ 5.9
-         _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-         _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
-         # Not sure whether something based on
-         # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-         # would be better.
-         output_verbose_link_cmd='echo'
-
-         # Archives containing C++ object files must be created using
-         # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-         # necessary to make sure instantiated templates are included
-         # in the archive.
-         _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-         ;;
-       esac
-       ;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      *)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-    esac
-    ;;
-  netbsd* | netbsdelf*-gnu)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      fi
-      output_verbose_link_cmd='echo'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-       # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-       # KCC will only create a shared library if the output file
-       # ends with ".so" (or ".sl" for HP-UX), so rename the library
-       # to its proper name (with version) after linking.
-       _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-       # Archives containing C++ object files must be created using
-       # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-       ;;
-      RCC*)
-       # Rational C++ 2.4.1
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      cxx*)
-       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-       # Commands to make compiler produce verbose output that lists
-       # what "hidden" libraries, object files and flags are used when
-       # linking a shared library.
-       #
-       # There doesn't appear to be a way to prevent this compiler from
-       # explicitly linking system object files so we need to strip them
-       # from the output so that they don't get included in the library
-       # dependencies.
-       output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-       ;;
-      *)
-       if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-         # Commands to make compiler produce verbose output that lists
-         # what "hidden" libraries, object files and flags are used when
-         # linking a shared library.
-         output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-       else
-         # FIXME: insert proper C++ library support
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-       # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-       # KCC will only create a shared library if the output file
-       # ends with ".so" (or ".sl" for HP-UX), so rename the library
-       # to its proper name (with version) after linking.
-       _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-       # Archives containing C++ object files must be created using
-       # the KAI C++ compiler.
-       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-       ;;
-      RCC*)
-       # Rational C++ 2.4.1
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      cxx*)
-       _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-         echo "-hidden">> $lib.exp~
-         $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-         $rm $lib.exp'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-       # Commands to make compiler produce verbose output that lists
-       # what "hidden" libraries, object files and flags are used when
-       # linking a shared library.
-       #
-       # There doesn't appear to be a way to prevent this compiler from
-       # explicitly linking system object files so we need to strip them
-       # from the output so that they don't get included in the library
-       # dependencies.
-       output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-       ;;
-      *)
-       if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-         # Commands to make compiler produce verbose output that lists
-         # what "hidden" libraries, object files and flags are used when
-         # linking a shared library.
-         output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-       else
-         # FIXME: insert proper C++ library support
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-       # Sun C++ 4.x
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      lcc*)
-       # Lucid
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      *)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-       # Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-       _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-       $CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-       case $host_os in
-         solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-         *)
-           # The compiler driver will combine and reorder linker options,
-           # but understands `-z linker_flag'.
-           # Supported since Solaris 2.6 (maybe 2.5.1?)
-           _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-           ;;
-       esac
-       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-       output_verbose_link_cmd='echo'
-
-       # Archives containing C++ object files must be created using
-       # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-       # necessary to make sure instantiated templates are included
-       # in the archive.
-       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-       ;;
-      gcx*)
-       # Green Hills C++ Compiler
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-       # The C++ compiler must be used to create the archive.
-       _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-       ;;
-      *)
-       # GNU C++ compiler with Solaris linker
-       if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-         _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-         if $CC --version | grep -v '^2\.7' > /dev/null; then
-           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-           _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-               $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-           # Commands to make compiler produce verbose output that lists
-           # what "hidden" libraries, object files and flags are used when
-           # linking a shared library.
-           output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-         else
-           # g++ 2.7 appears to require `-G' NOT `-shared' on this
-           # platform.
-           _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-           _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-               $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-           # Commands to make compiler produce verbose output that lists
-           # what "hidden" libraries, object files and flags are used when
-           # linking a shared library.
-           output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-         fi
-
-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-         case $host_os in
-         solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-         *)
-           _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-           ;;
-         esac
-       fi
-       ;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       ;;
-      *)
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       ;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-       ;;
-      *)
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-       ;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-       # NonStop-UX NCC 3.20
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-      *)
-       # FIXME: insert proper C++ library support
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       ;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-         || test $p = "-R"; then
-        prev=$p
-        continue
-       else
-        prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-        case $p in
-        -L* | -R*)
-          # Internal compiler library paths should come after those
-          # provided the user.  The postdeps already come after the
-          # user supplied libs so there is no need to process them.
-          if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-            _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-          else
-            _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-          fi
-          ;;
-        # The "-l" case would never come before the object being
-        # linked, so don't bother handling this case.
-        esac
-       else
-        if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-          _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-        else
-          _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-        fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-        pre_test_object_deps_done=yes
-        continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-        if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-          _LT_AC_TAGVAR(predep_objects, $1)="$p"
-        else
-          _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-        fi
-       else
-        if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-          _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-        else
-          _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-        fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_AC_TAGVAR(predep_objects,$1)=
-  _LT_AC_TAGVAR(postdep_objects,$1)=
-  _LT_AC_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[     ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-       mv -f "$nlist"T "$nlist"
-      else
-       rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-       if grep ' nm_test_func$' "$nlist" >/dev/null; then
-         cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-         # Now generate the symbol file.
-         eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-         cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-         $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-         cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-         # Now try linking the two files.
-         mv conftest.$ac_objext conftstm.$ac_objext
-         lt_save_LIBS="$LIBS"
-         lt_save_CFLAGS="$CFLAGS"
-         LIBS="conftstm.$ac_objext"
-         CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-         if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-           pipe_works=yes
-         fi
-         LIBS="$lt_save_LIBS"
-         CFLAGS="$lt_save_CFLAGS"
-       else
-         echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-       fi
-      else
-       echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-       [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-       ;;
-      *)
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       ;;
-      esac
-      ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[[4-9]]*)
-       # All AIX code is PIC.
-       if test "$host_cpu" = ia64; then
-         # AIX 5 now supports IA64 processor
-         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       else
-         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-       fi
-       ;;
-      chorus*)
-       case $cc_basename in
-       cxch68*)
-         # Green Hills C++ Compiler
-         # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-         ;;
-       esac
-       ;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-       case $cc_basename in
-         ec++*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           ;;
-         ghcx*)
-           # Green Hills C++ Compiler
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      freebsd* | dragonfly*)
-       # FreeBSD uses GNU C++
-       ;;
-      hpux9* | hpux10* | hpux11*)
-       case $cc_basename in
-         CC*)
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-           if test "$host_cpu" != ia64; then
-             _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-           fi
-           ;;
-         aCC*)
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-           case $host_cpu in
-           hppa*64*|ia64*)
-             # +Z the default
-             ;;
-           *)
-             _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-             ;;
-           esac
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      interix*)
-       # This is c89, which is MS Visual C++ (no shared libs)
-       # Anyone wants to do a port?
-       ;;
-      irix5* | irix6* | nonstopux*)
-       case $cc_basename in
-         CC*)
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-           # CC pic flag -KPIC is the default.
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      linux* | k*bsd*-gnu)
-       case $cc_basename in
-         KCC*)
-           # KAI C++ Compiler
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-           ;;
-         icpc* | ecpc*)
-           # Intel C++
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-           ;;
-         pgCC* | pgcpp*)
-           # Portland Group C++ compiler.
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           ;;
-         cxx*)
-           # Compaq C++
-           # Make sure the PIC flag is empty.  It appears that all Alpha
-           # Linux and Compaq Tru64 Unix objects are PIC.
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-           ;;
-         *)
-           case `$CC -V 2>&1 | sed 5q` in
-           *Sun\ C*)
-             # Sun C++ 5.9
-             _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-             _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-             _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-             ;;
-           esac
-           ;;
-       esac
-       ;;
-      lynxos*)
-       ;;
-      m88k*)
-       ;;
-      mvs*)
-       case $cc_basename in
-         cxx*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      netbsd* | netbsdelf*-gnu)
-       ;;
-      osf3* | osf4* | osf5*)
-       case $cc_basename in
-         KCC*)
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-           ;;
-         RCC*)
-           # Rational C++ 2.4.1
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           ;;
-         cxx*)
-           # Digital/Compaq C++
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           # Make sure the PIC flag is empty.  It appears that all Alpha
-           # Linux and Compaq Tru64 Unix objects are PIC.
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      psos*)
-       ;;
-      solaris*)
-       case $cc_basename in
-         CC*)
-           # Sun C++ 4.2, 5.x and Centerline C++
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-           ;;
-         gcx*)
-           # Green Hills C++ Compiler
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      sunos4*)
-       case $cc_basename in
-         CC*)
-           # Sun C++ 4.x
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           ;;
-         lcc*)
-           # Lucid
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      tandem*)
-       case $cc_basename in
-         NCC*)
-           # NonStop-UX NCC 3.20
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-       case $cc_basename in
-         CC*)
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           ;;
-       esac
-       ;;
-      vxworks*)
-       ;;
-      *)
-       _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-       ;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-       [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-       # +Z the default
-       ;;
-      *)
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       ;;
-      esac
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-       [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-       # +Z the default
-       ;;
-      *)
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-       ;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-       # which looks to be a dead project)
-       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-       *Sun\ C*)
-         # Sun C 5.9
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       *Sun\ F*)
-         # Sun Fortran 8.3 passes all unrecognized flags to the linker
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-         _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
-         ;;
-       esac
-       ;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    rdos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-       _LT_AC_TAGVAR(ld_shlibs, $1)=no
-       cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared